홈MCP워크벤치Skills
홈워크벤치알림마이페이지
llms.txt · MCP 가이드개인정보처리방침 · 이용약관 · 지원v1.8.3
  1. 홈
  2. /반응

Sodium Hydroxide → 4-[(4-Fluorophenyl)hydroxymethyl]-3-(hydroxymethyl)benzenecarbonitrile

HRID 2218540
인쇄

반응식

HRID 2218540 반응식
[OH:1][CH2:2][C:3]1[CH:4]=[C:5]([CH:8]=[CH:9][C:10]=1[C:11](=[O:19])[C:12]1[CH:17]=[CH:16][C:15]([F:18])=[CH:14][CH:13]=1)[C:6]#[N:7].C(C1C=C2C(=CC=1)C(=O)OC2)#N.OCC1C=C(C=CC=1C(C1C=CC(F)=CC=1)(C1C=CC(F)=CC=1)O)C#N.[BH4-].[Na+].[OH-].[Na+]>CC#N.O.O>[OH:1][CH2:2][C:3]1[CH:4]=[C:5]([CH:8]=[CH:9][C:10]=1[CH:11]([C:12]1[CH:17]=[CH:16][C:15]([F:18])=[CH:14][CH:13]=1)[OH:19])[C:6]#[N:7]
참가 물질반응 조건실험 절차후처리출처 및 근거반응 노트

참가 물질

8

반응물 5

HCID 14798Sodium HydroxideHCID 8212181,3-Dihydro-1-oxoisobenzofuran-5-carbonitrileHCID 4311764Sodium borohydrideHCID 109450024-(4-Fluorobenzoyl)-3-(hydroxymethyl)benzonitrile2회HCID 692071154-(Bis(4-fluorophenyl)(hydroxy)methyl)-3-(hydroxymethyl)benzonitrile

생성물 1

HCID 9921362
4-[(4-Fluorophenyl)hydroxymethyl]-3-(hydroxymethyl)benzenecarbonitrile

시약·촉매·용매 2

HCID 962Water용매HCID 18373917Acetonitrile--water (1/1)용매

반응 조건

온도
2.5 °C

실험 절차

The organic phase (950 ml), containing a theoretical quantity of 150 g of 3-hydroxymethyl-4-(4-fluorobenzoyl)benzonitrile, referred to the starting 5-cyanophthalide, and about 14-16% of 3-hydroxymethyl-4-[bis(4-fluorophenyl)hydroxymethyl]benzonitrile, is cooled at 0-5° C., under nitrogen atmosphere. A solution of 23.3 g of NaBH4, 230 ml of water and 1 ml of 30% NaOH is added to the mixture dropwise, in 30 minutes and at a temperature not higher than 15° C. At the end of the addition a control by HPLC [COLUMN: Develosil C18 4.6×250 mm, 5μ; DETECTOR: UV 240 nm; FLOW: 1.5 ml/min; GRADIENT: A: aq. NH4H2PO4+H3PO4-pH=2.85/B: CH3CN/H2O=9/1 (v/v)] detects the disappearance of 3-hydroxymethyl-4-(4-fluorobenzoyl)benzonitrile. The temperature is kept to 25° C., the aqueous phase is eliminated and tetrahydrofuran is evaporated under vacuum at 50° C. 100 ml of ethyl acetate are added to the residue and the solvent is evaporated under vacuum at 50° C., then other 350 ml of ethyl acetate are added. The phases are separated, the organic phase is collected and the aqueous phase is extracted with 230 ml of ethyl acetate. The phases are separated, the aqueous phase is discarded and the organic phases are collected obtaining 720 ml of a solution in ethyl acetate containing 150 g of 3-hydroxymethyl-4-[(4-fluorophenyl)hydroxymethyl]benzonitrile and the same quantity of 3-hydroxymethyl-4-[bis(4-fluorophenyl)hydroxymethyl]benzonitrile contained into the starting solution.

후처리

  1. customhigher than 15° C
  2. additionAt the end of the addition a control by HPLC [COLUMN
  3. customis kept to 25° C.
  4. customtetrahydrofuran is evaporated under vacuum at 50° C
  5. addition100 ml of ethyl acetate are added to the residue
  6. customthe solvent is evaporated under vacuum at 50° C.
  7. additionother 350 ml of ethyl acetate are added
  8. customThe phases are separated
  9. customthe organic phase is collected
  10. extractionthe aqueous phase is extracted with 230 ml of ethyl acetate
  11. customThe phases are separated
  12. customthe organic phases are collected

출처 및 근거

ORD 기록
ord-6048474116cc450f9d31c3bd6d0ee4dd
출처 데이터셋
uspto-grants-2008_08
DOI
10.6084/m9.figshare.5104873.v1
특허 번호
US07411077B2

반응 노트

이 페이지에서참가 물질반응 조건실험 절차후처리출처 및 근거반응 노트