홈MCP워크벤치Skills
홈워크벤치알림마이페이지
llms.txt · MCP 가이드개인정보처리방침 · 이용약관 · 지원v1.8.3
  1. 홈
  2. /반응

Hydrochloric Acid → Methyl 7-phenyl-3,5-dihydroxy-6-heptenoate

HRID 2226276
인쇄

반응식

HRID 2226276 반응식
[C:1]1([CH:7]=[CH:8][CH:9]([OH:18])[CH2:10][C:11](=[O:17])[CH2:12][C:13]([O:15][CH3:16])=[O:14])[CH:6]=[CH:5][CH:4]=[CH:3][CH:2]=1.C([BH3-])#N.[Na+].O.Cl>CO.CC(C)[O-].CC(C)[O-].CC(C)[O-].[Cl-].[Ti+4]>[C:1]1([CH:7]=[CH:8][CH:9]([OH:18])[CH2:10][CH:11]([OH:17])[CH2:12][C:13]([O:15][CH3:16])=[O:14])[CH:2]=[CH:3][CH:4]=[CH:5][CH:6]=1
참가 물질반응 조건실험 절차후처리출처 및 근거반응 노트

참가 물질

7

반응물 4

HCID 313Hydrochloric AcidHCID 962WaterHCID 5003444Sodium cyanoborohydrideHCID 53740643Methyl 7-phenyl-5-hydroxy-3-oxo-6-heptenoate

생성물 1

HCID 54384934Methyl 7-phenyl-3,5-dihydroxy-6-heptenoate수율 65.2%

시약·촉매·용매 2

HCID 3084342
Chlorotitanium triisopropoxide
촉매
HCID 887Methanol용매2회

반응 조건

온도
-10 °C

실험 절차

700 mg of methyl 7-phenyl-5-hydroxy-3-oxo-6-heptenoate (2.82 mmol) are dissolved in 25 cm3 of methanol and then cooled to -10° C. 0.71 cm3 of titanium chloride triisopropoxide (2.82 mmol) is added. The mixture is stirred for 20 minutes at -10° C. 207.8 mg of sodium cyanoborohydride (3.1 mmol) are then added and the mixture is then stirred for 3 hours 45 minutes at a temperature between -5° and 0° C. 5 cm3 of water and 1 cm3 of concentrated hydrochloric acid are added. After evaporation of the methanol under reduced pressure, the mixture is taken up in 50 cm3 of dichloromethane. The organic phase is washed with 25 cm3 of a saturated sodium bicarbonate solution and then with 25 cm3 of water and is then dried over sodium sulphate. After filtration and concentration to dryness, the residue obtained is treated with methanol. There is thus obtained, with a yield of 55%, 460 mg of methyl 7-phenyl-3,5-dihydroxy-6-heptenoate for which the syn/anti ratio is equal to 80/20.

후처리

  1. stirringthe mixture is then stirred for 3 hours 45 minutes at a temperature between -5° and 0° C
  2. customAfter evaporation of the methanol under reduced pressure
  3. washThe organic phase is washed with 25 cm3 of a saturated sodium bicarbonate solution
  4. dry with materialwith 25 cm3 of water and is then dried over sodium sulphate
  5. filtrationAfter filtration and concentration to dryness
  6. customthe residue obtained

출처 및 근거

ORD 기록
ord-023e42b75a2240e9b7673525036c317b
출처 데이터셋
uspto-grants-1994_09
DOI
10.6084/m9.figshare.5104873.v1
특허 번호
US05347039

반응 노트

이 페이지에서참가 물질반응 조건실험 절차후처리출처 및 근거반응 노트