Silicon tetrachloride → 3,5-Bis(trifluoromethyl)benzoyl chloride

HRID 2229881노트

반응식

HRID 2229881 반응식
[F:1][C:2]([F:17])([F:16])[C:3]1[CH:4]=[C:5]([CH:9]=[C:10]([C:12]([F:15])([F:14])[F:13])[CH:11]=1)[C:6](F)=[O:7].[Cl-].[Al+3].[Cl-].[Cl-].[Si](Cl)(Cl)(Cl)[Cl:23]>>[F:1][C:2]([F:17])([F:16])[C:3]1[CH:4]=[C:5]([CH:9]=[C:10]([C:12]([F:15])([F:14])[F:13])[CH:11]=1)[C:6]([Cl:23])=[O:7]

참가 물질

4

반응물 3

HCID 24816Silicon tetrachlorideHCID 6451240Aluminum(III) ChlorideHCID 9856492HCID 9856492, 화합물

생성물 1

HCID 1018563,5-Bis(trifluoromethyl)benzoyl chloride

반응 조건

온도
40 °C

실험 절차

1040 g of 3,5-bis(trifluoromethyl)benzoyl fluoride and 24 g of aluminum chloride were initially introduced and heated to 40° C. With stirring, 224 g of silicon tetrachloride were added dropwise over 3 hours, where the temperature was controlled and did not exceed 45° C. The mixture was then stirred until the evolution of gas had stopped (2 hours). 30 g of zeolite X133 were then added, and the mixture was filtered. This gave 1000 g of a cloudy filtrate, which was admixed with 5 g of triphenylphosphine and distilled at 12 mbar over a 70 cm column. This gave 623 g (83.6% of theory) of 3,5-bis(trifluoromethyl)benzoyl chloride which passed over at 68° C. (bath temperature: 80° C.).

후처리

  1. customdid not exceed 45° C
  2. stirringThe mixture was then stirred until the evolution of gas
  3. custom(2 hours)
  4. filtrationthe mixture was filtered
  5. distillationdistilled at 12 mbar over a 70 cm column
  6. custompassed over at 68° C. (bath temperature: 80° C.)

출처 및 근거

ORD 기록
ord-ecf16ddd89e74edf91f583c32b9d6690
출처 데이터셋
uspto-grants-2002_07
특허 번호
US06420601B2

반응 노트

불러오는 중…