홈MCP워크벤치Skills
홈워크벤치알림마이페이지
llms.txt · MCP 가이드개인정보처리방침 · 이용약관 · 지원v1.8.3
  1. 홈
  2. /반응

Dimethylformamide → 5-Chloro-1-methyl-3-(trifluoromethyl)-1H-pyrazole-4-carbaldehyde

HRID 230088
인쇄

반응식

HRID 230088 반응식
P(Cl)(Cl)([Cl:3])=O.[CH3:6][N:7]1[C:11](=O)[CH:10]=[C:9]([C:13]([F:16])([F:15])[F:14])[NH:8]1.[OH-].[Na+].CN([CH:22]=[O:23])C>>[CH3:6][N:7]1[C:11]([Cl:3])=[C:10]([CH:22]=[O:23])[C:9]([C:13]([F:16])([F:15])[F:14])=[N:8]1
참가 물질반응 조건실험 절차후처리출처 및 근거반응 노트

참가 물질

5

반응물 4

HCID 6228DimethylformamideHCID 14798Sodium HydroxideHCID 24813Phosphorus oxychlorideHCID 12386161-methyl-3-(trifluoromethyl)-1H-pyrazol-5-ol

생성물 1

HCID 14784595-Chloro-1-methyl-3-(trifluoromethyl)-1H-pyrazole-4-carbaldehyde수율 77%

반응 조건

온도
110 °C

실험 절차

21.35 g of phosphorus oxychloride was dropwise added to 4.72 g of DMF at 10° C. or lower. After the temperature of the reaction solutio was returned to room temperature, the reaction mixture was stirred for 1 hour, and 10.71 g of 1-methyl-3-trifluoromethyl-5-pyrazolone was added thereto. The resulting mixture was heated up to 110° C., and stirred for 7 hours. After having been left to be at 70° C. the reaction mixture was poured into ice water. After pH of the mixture was made to be about 4 with an aqueous solution of sodium hydroxide added thereto, and precipitated crystals were taken out through filtration and dried to obtain 10.55 g of 1-methyl-3-trifluoromethyl-5-chloropyrazole-4-carbaldehyde.

후처리

  1. customwas returned to room temperature
  2. stirringstirred for 7 hours
  3. waitAfter having been left
  4. customto be at 70° C.
  5. additionadded
  6. customprecipitated crystals
  7. filtrationwere taken out through filtration
  8. customdried

출처 및 근거

ORD 기록
ord-6f00d4dabdbb4fa3913e810c1b68794d
출처 데이터셋
uspto-grants-2009_07
DOI
10.6084/m9.figshare.5104873.v1
특허 번호
US07566683B2

반응 노트

이 페이지에서참가 물질반응 조건실험 절차후처리출처 및 근거반응 노트