홈MCP워크벤치Skills
홈워크벤치알림마이페이지
llms.txt · MCP 가이드개인정보처리방침 · 이용약관 · 지원v1.8.3
  1. 홈
  2. /반응

Hydrochloric Acid → 2-[(4-Fluorophenyl)methyl]thiophene

HRID 233127
인쇄

반응식

HRID 233127 반응식
[Cl-].[Cl-].[Cl-].[Al+3].[F:5][C:6]1[CH:14]=[CH:13][C:9]([C:10](Cl)=O)=[CH:8][CH:7]=1.[S:15]1[CH:19]=[CH:18][CH:17]=[CH:16]1.Cl>ClC1C=CC=CC=1>[F:5][C:6]1[CH:14]=[CH:13][C:9]([CH2:10][C:16]2[S:15][CH:19]=[CH:18][CH:17]=2)=[CH:8][CH:7]=1
참가 물질반응 조건실험 절차후처리출처 및 근거반응 노트

참가 물질

6

반응물 4

HCID 313Hydrochloric AcidHCID 8030ThiopheneHCID 678794-Fluorobenzoyl chlorideHCID 6451240Aluminum(III) Chloride

생성물 1

HCID 105839052-[(4-Fluorophenyl)methyl]thiophene수율 71.6%

시약·촉매·용매 1

HCID 7964Chlorobenzene용매2회

반응 조건

온도
80 °C

실험 절차

33.8 g of aluminium trichloride were suspended in 217 g of chlorobenzene, and a solution of 40.3 g of 4-fluorobenzoyl chloride in 37.4 g of chlorobenzene was added dropwise to this at 0° C. over the course of 15 minutes. The mixture was then stirred for 1 hour and then, at 0° C., 21.8 g of thiophene were added dropwise over the course of 20 minutes. The resulting hydrogen chloride was drawn off and absorbed in sodium hydroxide solution. The mixture was subsequently heated to 80° C. and the remaining hydrogen chloride was removed. The resulting solution was added dropwise to a suspension of 7.2 g of sodium borohydride in 47.2 g of digylme while stirring at 70° C. over the course of 45 minutes. The reaction mixture was then stirred for 90 minutes and then cooled to room temperature and discharged into a mixture of 250 g of ice, 44.6 g of concentrated aqueous hydrochloric acid and 500 g of water. The organic phase which formed thereby was separated off, the aqueous phase was extracted by shaking with chlorobenzene, and the combined organic phases were distilled. 35.0 g of product with a boiling point of 83° C./1.0 mbar and a purity of 99.7% (GC) were obtained. This corresponds to 73.9% of theory. The product contained less than 0.1% by weight of defluorinated compounds (GC).

후처리

  1. customabsorbed in sodium hydroxide solution
  2. customthe remaining hydrogen chloride was removed
  3. additionThe resulting solution was added dropwise to a suspension of 7.2 g of sodium borohydride in 47.2 g of digylme
  4. stirringwhile stirring at 70° C. over the course of 45 minutes
  5. stirringThe reaction mixture was then stirred for 90 minutes
  6. temperaturecooled to room temperature
  7. additiondischarged into a mixture of 250 g of ice, 44.6 g of concentrated aqueous hydrochloric acid and 500 g of water
  8. customThe organic phase which formed
  9. customthereby was separated off
  10. extractionthe aqueous phase was extracted
  11. stirringby shaking with chlorobenzene
  12. distillationthe combined organic phases were distilled

출처 및 근거

ORD 기록
ord-703d8cd7e84345249f8b55cc33300f3f
출처 데이터셋
uspto-grants-1997_01
DOI
10.6084/m9.figshare.5104873.v1
특허 번호
US05591869

반응 노트

이 페이지에서참가 물질반응 조건실험 절차후처리출처 및 근거반응 노트