홈MCP워크벤치Skills
홈워크벤치알림마이페이지
llms.txt · MCP 가이드개인정보처리방침 · 이용약관 · 지원v1.8.3
  1. 홈
  2. /반응

4-Aminophenol → 3-[3-(Dimethoxymethylsilyl)propoxy]benzenamine

HRID 236627
인쇄

반응식

HRID 236627 반응식
[CH:1]1[C:6]([NH2:7])=[CH:5][CH:4]=[C:3](O)[CH:2]=1.[OH-:9].[Na+].CS(C)=O.Cl[CH2:16][CH2:17][CH2:18][Si:19]([CH3:24])([O:22][CH3:23])[O:20][CH3:21]>C1(C)C=CC=CC=1>[NH2:7][C:6]1[CH:1]=[C:2]([CH:3]=[CH:4][CH:5]=1)[O:9][CH2:16][CH2:17][CH2:18][Si:19]([CH3:24])([O:22][CH3:23])[O:20][CH3:21]
참가 물질반응 조건실험 절차후처리출처 및 근거반응 노트

참가 물질

6

반응물 4

HCID 4034-AminophenolHCID 679Dimethyl SulfoxideHCID 14798Sodium HydroxideHCID 87491Silane, (3-chloropropyl)dimethoxymethyl-

생성물 1

HCID 138791723-[3-(Dimethoxymethylsilyl)propoxy]benzenamine수율 80%

시약·촉매·용매 1

HCID 1140Toluene
용매

반응 조건

온도
115 °C

실험 절차

Using the general procedure described in Example 1 a reactor was charged with 60 g (0.55 mole) of p-aminophenol, 43.28 g of a 50% by weight aqueous solution of sodium hydroxide (0.54 mole NaOH), 112 cc dimethylsulfoxide and 120 cc toluene. The resultant mixture was heated to the boiling point for six hours under a nitrogen atmosphere to remove all of the water present by azeotropic distillation. The reaction mixture was then allowed to cool to about 75° C., at which time 100.4 g (0.56 mole) of 3-chloropropyl methyldimethoxysilane was added dropwise while the reaction mixture was stirred. Following completion of the addition the reaction mixture was heated at 115° C. for about 16 hours, following which the mixture was allowed to cool and was filtered to remove any solid material. The solvents were then removed under a pressure of about 15 mm of mercury at a temperature of about 60° C. The pressure was then reduced to from 3 to 4 mm of mercury and the material boiling from 230° to 235° C. was removed. This fraction weighed 112 g, equivalent to a yield of 80% based on starting materials. Analysis by vapor phase chromatography indicated that the purity of the product was greater than 98%. The infrared and nuclear magnetic resonance spectra of the product were consistent with the proposed structure.

후처리

  1. customto remove all of the water present
  2. distillationby azeotropic distillation
  3. additionwas added dropwise while the reaction mixture
  4. additioncompletion of the addition the reaction mixture
  5. temperatureto cool
  6. filtrationwas filtered
  7. customto remove any solid material
  8. customThe solvents were then removed under a pressure of about 15 mm of mercury at a temperature of about 60° C
  9. customboiling from 230° to 235° C.
  10. customwas removed

출처 및 근거

ORD 기록
ord-a108001f38774293ba8f02a29f05b392
출처 데이터셋
uspto-grants-1987_02
DOI
10.6084/m9.figshare.5104873.v1
특허 번호
US04645844

반응 노트

이 페이지에서참가 물질반응 조건실험 절차후처리출처 및 근거반응 노트