홈MCP워크벤치Skills
홈워크벤치알림마이페이지
llms.txt · MCP 가이드개인정보처리방침 · 이용약관 · 지원v1.8.3
  1. 홈
  2. /반응

Styrene → Isobutylene styrene

HRID 2408162
인쇄

반응식

HRID 2408162 반응식
[CH3:1][CH:2]1[CH2:7]CCC[CH2:3]1.[C:8](Cl)([C:11]1[CH:16]=[CH:15][CH:14]=[CH:13][CH:12]=1)(C)[CH3:9].CC(=C)C.C=CC1C=CC=CC=1>[Ti](Cl)(Cl)(Cl)Cl.C(Cl)CCC>[CH2:9]=[CH:8][C:11]1[CH:16]=[CH:15][CH:14]=[CH:13][CH:12]=1.[CH3:3][C:2](=[CH2:1])[CH3:7]
참가 물질반응 조건실험 절차후처리출처 및 근거반응 노트

참가 물질

7

반응물 4

HCID 7501StyreneHCID 7962MethylcyclohexaneHCID 8255IsobutyleneHCID 70281(1-Chloro-1-methylethyl)benzene

생성물 1

HCID 44154101Isobutylene styrene

시약·촉매·용매 2

HCID 24193Titanium Tetrachloride촉매
HCID 8005
Butyl Chloride
용매

반응 조건

온도
-70 °C

실험 절차

In a 2 L reaction vessel equipped with a stirrer, 589 mL of methylcyclohexane (dried over molecular sieves), 613 mL of n-butyl chloride (dried over molecular sieves) and 0.550 g of cumyl chloride were charged. After cooling the reaction vessel to −70° C., 0.35 mL of α-picoline(2-methylpyridine) and 179 mL of isobutylene were added. Further, 9.4 mL of titanium tetrachloride was added to start polymerization, and then the solution was reacted for 2.0 hours while being stirred at −70° C. Next, 59 mL of styrene was added into the reaction vessel and the reaction was continued for 60 minutes, and then the reaction was terminated by adding a large amount of methanol. After removing the solvent and the like from the reaction solution, a polymer was dissolved in toluene and washed twice with water. This toluene solution was added to the methanol mixture, thereby precipitating a polymer, and the resultant polymer was dried at 60° C. for 24 hours to obtain a styrene-isobutylene diblock copolymer. The resultant styrene-isobutylene diblock copolymer has a weight-average molecular weight of 70,000 and a styrene unit content of 15% by mass.

후처리

  1. customIn a 2 L reaction vessel
  2. customequipped with a stirrer
  3. custompolymerization
  4. customthe solution was reacted for 2.0 hours
  5. customthe reaction was terminated
  6. additionby adding a large amount of methanol
  7. customAfter removing the solvent
  8. dissolutionthe like from the reaction solution, a polymer was dissolved in toluene
  9. washwashed twice with water
  10. additionThis toluene solution was added to the methanol mixture
  11. customprecipitating a polymer
  12. dry with materialthe resultant polymer was dried at 60° C. for 24 hours

출처 및 근거

ORD 기록
ord-e6a1c91ed9a94ae08fd5035513497206
출처 데이터셋
uspto-grants-2014_08
DOI
10.6084/m9.figshare.5104873.v1
특허 번호
US08815033B2

반응 노트

이 페이지에서참가 물질반응 조건실험 절차후처리출처 및 근거반응 노트