Oxalic Acid → Vanadium hydroxide oxide phosphate

HRID 2418455

반응식

HRID 2418455 반응식
[P].[V:2].[P:3](=[O:7])([OH:6])([OH:5])[OH:4].C(O)(=O)C(O)=[O:10].[O-2:14].[O-2].[O-2].[O-2].[O-2].[V+5].[V+5]>O>[OH-:4].[OH-:10].[OH-:14].[OH-:4].[OH-:4].[O-2:4].[O-2:4].[O-2:4].[O-2:4].[O-2:4].[O-:5][P:3]([O-:7])([O-:6])=[O:4].[O-:5][P:3]([O-:7])([O-:6])=[O:4].[O-:5][P:3]([O-:7])([O-:6])=[O:4].[O-:5][P:3]([O-:7])([O-:6])=[O:4].[O-:5][P:3]([O-:7])([O-:6])=[O:4].[V:2].[V:2].[V:2].[V:2].[V:2].[V:2]

참가 물질

7

반응 조건

온도
80 °C

실험 절차

As an example of a starting material suitable for an amorphous complex oxide containing phosphorus and vanadium as the major constituents, a vanadyl phosphate solution was prepared. In 3.0 kg of deionized water, 2.956 kg of 85% phosphoric acid was dissolved, and 2.55 kg of oxalic acid (H2C2O4.2H2O) was further added and dissolved under heating. The solution was heated to 80° C., and 1.842 kg of vanadium pentoxide was gradually added and dissolved while paying a careful attention to the generation of bubbles. Then, the heating was continued for further 10 minutes under the boiling condition to complete the reduction. The solution was cooled, and deionized water was added to adjust the total amount to 10.00 kg, whereby the second component was obtained.

후처리

  1. dissolutiondissolved
  2. temperatureunder heating
  3. dissolutiondissolved
  4. temperatureThe solution was cooled
  5. additionwas added
  6. customwas obtained

출처 및 근거

ORD 기록
ord-3f07bab1c69a45bcb57e2181d92b9fed
출처 데이터셋
uspto-grants-1984_09
특허 번호
US04472527

연결된 노트

불러오는 중…