홈MCP워크벤치Skills
홈워크벤치알림마이페이지
llms.txt · MCP 가이드개인정보처리방침 · 이용약관 · 지원v1.8.3
  1. 홈
  2. /반응

Thioglycolic Acid → 2,5-Dichlorobenzenethiol

HRID 248597
인쇄

반응식

HRID 248597 반응식
Br[C:2]1[CH:7]=[C:6]([Cl:8])[CH:5]=[CH:4][C:3]=1[Cl:9].C(O)(=O)C[SH:12].[OH-].[Na+]>CS(C)=O>[Cl:9][C:3]1[CH:4]=[CH:5][C:6]([Cl:8])=[CH:7][C:2]=1[SH:12]
참가 물질반응 조건실험 절차후처리출처 및 근거반응 노트

참가 물질

5

반응물 3

HCID 1133Thioglycolic AcidHCID 14798Sodium HydroxideHCID 150332-Bromo-1,4-dichlorobenzene

생성물 1

HCID 799652,5-Dichlorobenzenethiol

시약·촉매·용매 1

HCID 679Dimethyl Sulfoxide용매

반응 조건

온도
120 °C

실험 절차

To a 300 ml four-necked flask equipped with a stirrer, a thermometer and a condenser were charged 24.9 g (0.110 mol) of 1-bromo-2,5-dichlorobenzene, 13.19 g (0.143 mol) of thioglycolic acid, 12.06 g (0.286 mol) of 95% sodium hydroxide and 100 g of dimethylsulfoxide, followed by stirring at 120° C. for 4 hours. After cooling until 100° C., 2,5-dichlorothiophenol salt produced as the side product was treated with 5.13 g (0.044 mol) of sodium monochloroacetate at the same temperature for 1 hour. Then, after distilling off the dimethylsulfoxide under reduced pressure, 100 g of water was added to 54.5 g of the residue. After dissolving the residue therein at 100° C., the solution was cooled for crystallization and filtered to yield sodium 2,5-dichlorophenylthioglycolate, which was then dissolved in 100 g of water with heating and acidized with concentrated hydrochloric acid, filtered and dried to yield 23.5 g of a light yellowish white powder of 2,5-dichlorophenylthioglycolic acid. The yield based on 1-bromo-2,5-dichlorobenzene was 90.0%.

후처리

  1. customTo a 300 ml four-necked flask equipped with a stirrer
  2. temperatureAfter cooling until 100° C.

출처 및 근거

ORD 기록
ord-7413c997d4d6406485f13cdbe64a7755
출처 데이터셋
uspto-grants-1993_05
DOI
10.6084/m9.figshare.5104873.v1
특허 번호
US05210291

반응 노트

이 페이지에서참가 물질반응 조건실험 절차후처리출처 및 근거반응 노트