홈MCP워크벤치Skills
홈워크벤치알림마이페이지
llms.txt · MCP 가이드개인정보처리방침 · 이용약관 · 지원v1.8.3
  1. 홈
  2. /반응

1-Phenylethanol → 1,1',1''-(1-Methyl-1,3,5-pentanetriyl)tris(benzene)

HRID 256485
인쇄

반응식

HRID 256485 반응식
C(C1C=CC=CC=1)(CC)C.[Na].[CH3:12][CH:13](O)[C:14]1[CH:19]=[CH:18][CH:17]=[CH:16][CH:15]=1.C=CC1C=CC=CC=1.[C:29]1([CH2:35][CH2:36][C:37]([C:41]2[CH:46]=[CH:45][CH:44]=[CH:43][CH:42]=2)(C)[CH2:38]C)[CH:34]=[CH:33][CH:32]=[CH:31][CH:30]=1>CO>[C:14]1([CH2:13][CH2:12][CH:35]([C:29]2[CH:34]=[CH:33][CH:32]=[CH:31][CH:30]=2)[CH2:36][CH:37]([C:41]2[CH:42]=[CH:43][CH:44]=[CH:45][CH:46]=2)[CH3:38])[CH:19]=[CH:18][CH:17]=[CH:16][CH:15]=1
참가 물질반응 조건실험 절차후처리출처 및 근거반응 노트

참가 물질

7

반응물 5

HCID 74091-PhenylethanolHCID 7501StyreneHCID 8680Sec-Butylbenzene2회HCID 3253992Benzene, 1,1'-(1-ethyl-1-methyl-1,3-propanediyl)bis-HCID 5360545Sodium2회

생성물 1

HCID 865381,1',1''-(1-Methyl-1,3,5-pentanetriyl)tris(benzene)수율 460%

시약·촉매·용매 1

HCID 887Methanol용매

반응 조건

온도
135 °C

실험 절차

A one-liter glass flask equipped with a stirrer, a dropping funnel with a gas introduction conduit, a reflux condenser with a calcium chloride tube, and a thermometer was charged with 268 grams (2.0 moles) of purified secondary butylbenzene, 4.0 grams (0.17 mole) of metallic sodium and 2.4 grams (0.02 moles) of α-phenethyl alcohol while introducing argon gas through the gas introduction conduit, and the resulting mixture was heated to 135° C. Then 69 grams (0.66 mole) of purified styrene and 20 grams (0.15 mole) of secondary butylbenzene were dropped thereto over 2 hours while maintaining the temperature of the reaction system at 135° C. After dropwise addition was completed, the reaction mixture was stirred while heating for 1 hour and then cooled to room temperature. An excess of metallic sodium was decomposed by dropping methanol in small portions while stirring. Introduction of argon gas was stopped, and the contents were transferred to a separating funnel and then washed with water. The aqueous laer was removed, and the remaining oily layer was analyzed by gas chromatography. This gas chromatographic analysis showed that 40.7 grams (0.17 mole) of 1,3-dipenyl-3-methylpentane and 31.4 grams (0.092 mole) of 1,3,5-triphenyl-5-methylpentane were formed. The total yield (per styrene) was 54 mole %.

후처리

  1. customA one-liter glass flask equipped with a stirrer, a dropping funnel with a gas introduction conduit, a reflux condenser with a calcium chloride tube
  2. additionwhile introducing argon gas through the gas introduction conduit
  3. temperatureover 2 hours while maintaining the temperature of the reaction system at 135° C
  4. additionAfter dropwise addition
  5. temperaturewhile heating for 1 hour
  6. temperaturecooled to room temperature
  7. stirringwhile stirring
  8. customthe contents were transferred to a separating funnel
  9. washwashed with water
  10. customThe aqueous laer was removed

출처 및 근거

ORD 기록
ord-5e255eff820845aabc5c7bc4b2b207b6
출처 데이터셋
uspto-grants-1987_10
DOI
10.6084/m9.figshare.5104873.v1
특허 번호
US04703124

반응 노트

이 페이지에서참가 물질반응 조건실험 절차후처리출처 및 근거반응 노트