홈MCP워크벤치Skills
홈워크벤치알림마이페이지
llms.txt · MCP 가이드개인정보처리방침 · 이용약관 · 지원v1.8.3
  1. 홈
  2. /반응

Glyoxylic Acid → Formate

HRID 257309
인쇄

반응식

HRID 257309 반응식
[C:1]([OH:5])(=[O:4])[CH:2]=[O:3].C(N)CN.[C:10]([OH:14])(=[O:13])CC>O=[Mn]=O>[C:1]([O-:5])(=[O:4])[CH:2]=[O:3].[C:2]([O-:13])(=[O:3])[C:1]([O-:5])=[O:4].[CH:10]([O-:14])=[O:13]
참가 물질반응 조건실험 절차후처리출처 및 근거반응 노트

참가 물질

7

반응물 3

HCID 760Glyoxylic AcidHCID 1032Propionic AcidHCID 3301Ethylenediamine

생성물 3

HCID 283FormateHCID 71081OxalateHCID 3614358Npc324351

시약·촉매·용매 1

HCID 14801Manganese dioxide
촉매

반응 조건

온도
15 °C

실험 절차

Into a 3 oz. Fischer-Porter glass aerosol reaction vessel was placed a magnetic stirring bar and 10 mL of an aqueous solution containing glyoxylic acid (750 mM), ethylene diamine (865 mM), FMN (0.01 mM), propionic acid (HPLC internal standard, 75 mM), and MnO2 (0.466 g, 14,000 IU). The final pH of this solution was 9.1. The reaction vessel was sealed and the reaction mixture was cooled to 15° C., then the vessel was flushed with oxygen by pressurizing to 70 psig (483 kPa) and venting to atmospheric pressure five times with stirring. The vessel was then pressurized to 70 psi (483 kPa) of oxygen and the mixture stirred. Aliquots (0.10 mL) were removed through a sampling port (without loss of pressure in the vessel) at regular intervals for analysis by HPLC to monitor the process of the reaction. After 21.5 hours, the HPLC yields of glyoxylate, oxalate, and formate were 14.9%, 2.6%, and 50%, respectively.

후처리

  1. customFischer-Porter glass aerosol reaction vessel
  2. customThe reaction vessel was sealed
  3. customthe vessel was flushed with oxygen
  4. stirringthe mixture stirred
  5. customAliquots (0.10 mL) were removed through a sampling port (without loss of pressure in the vessel) at regular intervals for analysis by HPLC
  6. customthe process of the reaction

출처 및 근거

ORD 기록
ord-eeb83502fe9440ffae0bff08eb90abbd
출처 데이터셋
uspto-grants-1993_11
DOI
10.6084/m9.figshare.5104873.v1
특허 번호
US05262314

반응 노트

이 페이지에서참가 물질반응 조건실험 절차후처리출처 및 근거반응 노트