홈MCP워크벤치Skills
홈워크벤치알림마이페이지
llms.txt · MCP 가이드개인정보처리방침 · 이용약관 · 지원v1.8.0
  1. 홈
  2. /반응

Hydrochloric Acid → 5-Chloromethylfurfural

HRID 262395
노트
인쇄 미리보기

반응식

HRID 262395 반응식
[O:1]=[CH:2][C@@H:3]([C@H:5]([C@@H:7]([C@@H:9]([CH2:11]O)[OH:10])O)O)O.C(OS(C1C=CC=CC=1)(=O)=O)CCCCCCCCCCC.[Na].O.[ClH:37]>[Cl-].C([N+](C)(C)C)CCCCCCCCCCCCCCC.C1(C)C=CC=CC=1>[Cl:37][CH2:11][C:9]1[O:10][C:3]([CH:2]=[O:1])=[CH:5][CH:7]=1
참가 물질실험 절차후처리출처 및 근거반응 노트

참가 물질

7

반응물 4

HCID 313Hydrochloric AcidHCID 962WaterHCID 107526(2R,3S,4R,5R)-2,3,4,5,6-pentahydroxyhexanalHCID 57371080Sodium dodecylbenzene sulphonate

생성물 1

HCID 741915-Chloromethylfurfural

시약·촉매·용매 2

HCID 8154Hexadecyltrimethylammonium chloride촉매
HCID 1140
Toluene
용매

실험 절차

To a three-necked flask equipped with a condenser and a stirrer were added 5 g (0.028 mole) of a commercially available D-(+)-glucose and two kinds of surface active agent, i.e., 97.6 mg (0.00028 mole) of sodium laurylbenzenesulfonate and 89.6 mg (0.00028 mole) of cetyltrimethylammonium chloride. Then, 5 ml of water and 30 ml of toluene were added thereto and the mixture was stirred. Thereafter, a molar excess of hydrogen chloride (about 13 g) was passed through the mixture at room temperature for about 25 minutes with thorough stirring, and then stirring was continued at 45° C. for a further 3 hours. After the supernatant toluene layer was separated from the reaction solution, 30 ml of toluene was freshly added to the residual aqueous layer. After the mixture was stirred at 45° C. for 2 hours, the upper toluene layer was again separated. This toluene extraction operation was repeated four times in total. All the toluene layers were combined and filtered through Celite. The filtrate was neutralized with an aqueous sodium hydrogen carbonate solution, dried over anhydrous sodium sulfate and concentrated. Thus, about 2.4 g (theoretical yield 4.01 g) of 5-chloromethylfurfural was obtained as a crude liquor of pale brown color.

후처리

  1. customTo a three-necked flask equipped with a condenser and a stirrer
  2. stirringstirring
  3. customAfter the supernatant toluene layer was separated from the reaction solution, 30 ml of toluene
  4. additionwas freshly added to the residual aqueous layer
  5. stirringAfter the mixture was stirred at 45° C. for 2 hours
  6. customthe upper toluene layer was again separated
  7. extractionThis toluene extraction operation
  8. filtrationfiltered through Celite
  9. dry with materialdried over anhydrous sodium sulfate
  10. concentrationconcentrated

출처 및 근거

ORD 기록
ord-e96d88b9dbd444f9ab9286db9ec62e96
출처 데이터셋
uspto-grants-1979_05
DOI
10.6084/m9.figshare.5104873.v1
특허 번호
US04154744

반응 노트

불러오는 중…

이 페이지에서참가 물질실험 절차후처리출처 및 근거반응 노트