홈MCP워크벤치Skills
홈워크벤치알림마이페이지
llms.txt · MCP 가이드개인정보처리방침 · 이용약관 · 지원v1.8.1
  1. 홈
  2. /반응

Phenol → Diglycidyl ether

HRID 267896
인쇄

반응식

HRID 267896 반응식
[C:1]1([OH:7])[CH:6]=[CH:5]C=CC=1.B(F)(F)F.C[CH2:13][O:14][CH2:15][CH3:16].C(C1[O:21]C1)Cl.[OH-].[Na+]>O.C1(C)C=CC=CC=1>[CH2:16]([O:7][CH2:1][CH:6]1[O:21][CH2:5]1)[CH:15]1[O:14][CH2:13]1
참가 물질반응 조건실험 절차후처리출처 및 근거반응 노트

참가 물질

7

반응물 4

HCID 996PhenolHCID 7835EpichlorohydrinHCID 8000Boron trifluoride etherateHCID 14798Sodium Hydroxide

생성물 1

HCID 16704Diglycidyl ether

시약·촉매·용매 2

HCID 962Water용매HCID 1140Toluene
용매

반응 조건

온도
30 °C

실험 절차

A reaction vessel was charged with 94.1 g (1 mol) of phenol, 1.5 g of boron trifluoride-etherate and 100 ml. of toluene, and with good stirring, the temperature was maintainined at 55° to 65°C., and 277.5 g (3 mols) of epichlorohydrin was added dropwise over the course of 3 hours and 20 minutes. The mixture was further stirred for 1 hour at this temperature to complete an addition polymerization reaction of these monomers. At this point, a part of the addition polymer was withdrawn, and analysis of it showed no presence of epichlorohydrin. 400 ml. of toluene was added to the reaction mixture, and the mixture stirred thoroughly. While maintaining the inside temperature of the reactor at 40° to 45°C., 67.3 g (1.2 mols) of solid sodium hydroxide was added over the course of 1 hour. The mixture was further stirred at this temperature for 1 hour, and then cooled to about 30°C. 440 ml. of water was added to remove the resulting potassium chloride. The organic layer was further washed with 150 ml. of water, and the toluene was evaporated off at reduced pressure. The residue was filtered to afford phenylpolyepichlorohydrin monoglycidyl ether as a transparent light yellow liquid.

후처리

  1. customwas maintainined at 55° to 65°C.
  2. additionan addition polymerization reaction of these monomers
  3. customAt this point, a part of the addition polymer was withdrawn
  4. additionof toluene was added to the reaction mixture
  5. stirringthe mixture stirred thoroughly
  6. temperatureWhile maintaining the inside temperature of the reactor at 40° to 45°C.
  7. stirringThe mixture was further stirred at this temperature for 1 hour
  8. customto remove the resulting potassium chloride
  9. washThe organic layer was further washed with 150 ml
  10. customof water, and the toluene was evaporated off at reduced pressure
  11. filtrationThe residue was filtered

출처 및 근거

ORD 기록
ord-7db248506fde4816913cec18394bd133
출처 데이터셋
uspto-grants-1976_03
DOI
10.6084/m9.figshare.5104873.v1
특허 번호
US03945972

반응 노트

이 페이지에서참가 물질반응 조건실험 절차후처리출처 및 근거반응 노트