홈MCP워크벤치Skills
홈워크벤치알림마이페이지
llms.txt · MCP 가이드개인정보처리방침 · 이용약관 · 지원v1.8.3
  1. 홈
  2. /반응

Sodium hydride → 4-Chloro-7-((2-(trimethylsilyl)ethoxy)methyl)-7H-pyrrolo(2,3-d)pyrimidine

HRID 334216
인쇄

반응식

HRID 334216 반응식
[Cl:1][C:2]1[N:7]=[CH:6][NH:5][C:4]2=[N:8][CH:9]=[CH:10][C:3]=12.[H-].[Na+].[CH3:13][Si:14]([CH2:17][CH2:18][O:19][CH2:20]Cl)([CH3:16])[CH3:15]>O.CC(OC)(C)C>[Cl:1][C:2]1[C:3]2[CH:10]=[CH:9][N:8]([CH2:20][O:19][CH2:18][CH2:17][Si:14]([CH3:16])([CH3:15])[CH3:13])[C:4]=2[N:5]=[CH:6][N:7]=1
참가 물질반응 조건실험 절차후처리출처 및 근거반응 노트

참가 물질

6

반응물 3

HCID 24758Sodium hydrideHCID 27242712-Chloromethyl 2-(trimethylsilyl)ethyl etherHCID 178418725HCID 178418725, 화합물

생성물 1

HCID 467367974-Chloro-7-((2-(trimethylsilyl)ethoxy)methyl)-7H-pyrrolo(2,3-d)pyrimidine수율 88.9%

시약·촉매·용매 2

HCID 962Water용매2회
HCID 15413
tert-Butyl methyl ether
용매

반응 조건

온도
-5 °C

실험 절차

To a flask equipped with a nitrogen inlet, addition funnel, thermowell, and mechanical stirrer was added 4-chloro-7H-pyrrolo[2,3-d]pyrimidine (1, 600 g, 3.91 mol) and dimethylacetimide (9.6 L). The mixture was cooled to −5° C. in an ice/brine bath and sodium hydride (NaH, 60 wt %, 174 g, 4.35 mol, 1.1 equiv) was added in portions as a solid. The mixture went to a dark solution during 15 minutes and trimethylsilylethoxymethyl chloride (2, 763 mL, 4.31 mol, 1.1 equiv) was added slowly via an addition funnel at a rate that the temperature did not exceed 5° C. The reaction was stirred for 30 minutes, determined to be complete by TLC and HPLC, and water (1 L) was slowly added to quench the reaction. The mixture was then diluted with water (12 L) and MTBE (8 L). The layers were separated and the aqueous was re-extracted with MTBE (8 L). The combined organic layers were washed with water (2×4 L) and brine (4 L), dried over sodium sulfate (NaSO4), and solvents removed under reduced pressure. The residue was dissolved in heptane (2 L), filtered and loaded onto a silica gel (3.5 kg) column eluting with heptane (˜6 L), 95% heptane/ethyl acetate (˜12 L), 90% heptane/ethyl acetate (10 L), and finally 80% heptane/ethyl acetate (10 L). The pure fractions were combined and concentrated under reduced pressure to give 4-chloro-7-(2-trimethylsilanylethoxymethyl)-7H-pyrrolo[2,3-d]pyrimidine (3a, 987 g, 1109.8 g theoretical, 88.9% yield) as a pale yellow oil that partially solidified to an oily solid on standing at room temperature. For 3a: 1H NMR (DMSO-d6, 300 MHz) δ ppm 8.67 (s, 1H), 7.87 (d, 1H, J=3.8 Hz), 6.71 (d, 1H, J=3.6 Hz), 5.63 (s, 2H), 3.50 (t, 2H, J=7.9 Hz), 0.80 (t, 2H, J=8.1 Hz), 1.24 (s, 9H); 13C NMR (DMSO-d6, 100 MHz) δ ppm 151.3, 150.8, 150.7, 131.5, 116.9, 99.3, 72.9, 65.8, 17.1, −1.48; C12H18ClN3OSi (MW 283.83), LCMS (EI) m/e 284/286 (M++H).

후처리

  1. customTo a flask equipped with a nitrogen inlet, addition funnel
  2. customdid not exceed 5° C
  3. additionwas slowly added
  4. customto quench
  5. customthe reaction
  6. customThe layers were separated
  7. extractionthe aqueous was re-extracted with MTBE (8 L)
  8. washThe combined organic layers were washed with water (2×4 L) and brine (4 L)
  9. dry with materialdried over sodium sulfate (NaSO4), and solvents
  10. customremoved under reduced pressure
  11. dissolutionThe residue was dissolved in heptane (2 L)
  12. filtrationfiltered
  13. washeluting with heptane (˜6 L), 95% heptane/ethyl acetate (˜12 L), 90% heptane/ethyl acetate (10 L), and finally 80% heptane/ethyl acetate (10 L)
  14. concentrationconcentrated under reduced pressure

출처 및 근거

ORD 기록
ord-36c90105888d4b5a99c1840ad22b85f4
출처 데이터셋
uspto-grants-2014_11
DOI
10.6084/m9.figshare.5104873.v1
특허 번호
US08883806B2

반응 노트

이 페이지에서참가 물질반응 조건실험 절차후처리출처 및 근거반응 노트