홈MCP워크벤치Skills
홈워크벤치알림마이페이지
llms.txt · MCP 가이드개인정보처리방침 · 이용약관 · 지원v1.8.3
  1. 홈
  2. /반응

Sodium Dithionite → 2,7-Dichloro-6-fluoroquinoline-3-carboxylic acid

HRID 344849
인쇄

반응식

HRID 344849 반응식
[Mn]([O-])(=O)(=O)=O.[K+].[Cl:7][C:8]1[NH:9][C:10]2[C:15]([CH2:16][C:17]=1[CH:18]=[O:19])=[CH:14][C:13]([F:20])=[C:12]([Cl:21])[CH:11]=2.S(S([O-])=O)([O-])=[O:23].[Na+].[Na+]>O.[OH-].[K+]>[Cl:7][C:8]1[C:17]([C:18]([OH:23])=[O:19])=[CH:16][C:15]2[C:10](=[CH:11][C:12]([Cl:21])=[C:13]([F:20])[CH:14]=2)[N:9]=1
참가 물질실험 절차후처리출처 및 근거반응 노트

참가 물질

6

반응물 3

HCID 24489Sodium DithioniteHCID 516875Potassium PermanganateHCID 147005452,7-Dichloro-6-fluoro-3-formyl-1,4-dihydroquinoline

생성물 1

HCID 147266242,7-Dichloro-6-fluoroquinoline-3-carboxylic acid수율 115.9%

시약·촉매·용매 2

HCID 962Water용매2회
HCID 14797
Potassium Hydroxide
용매

실험 절차

A solution of potassium permanganate (89.3 g) in water (1.4 liters) is added in the course of 1 hour to a stirred suspension, cooled to 10° C., of 2,7-dichloro-6-fluoro-3-formyl-1,4-dihydroquinoline (69.5 g) in 2 N aqueous potassium hydroxide (282 cc) and water (282 cc) while the temperature is maintained at between 10° and 14° C. The temperature is allowed to rise to approximately 20° C. and the mixture is stirred for a further 30 minutes at this temperature. Sodium dithionite (26 g) is added and the mixture is stirred for 10 minutes at a temperature in the region of 20° C., filtered through diatomaceous silica for filtration and washed with water (2×250 cc). The filtrate and the aqueous washing phases are combined and treated with 35% strength aqueous hydrochloric acid solution (90 cc). The precipitate formed is extracted with ethyl acetate (4×500 cc). The combined organic extracts are washed with water (3×500 cc), dried over magnesium sulphate, filtered and concentrated under reduced pressure (20 kPa) at 50° C. The residue is taken up with ethyl ether (350 cc), drained and washed with ethyl ether (2×200 cc). 2,7-Dichloro-6-fluoro-3-quinolinecarboxylic acid (45 g) is obtained in the form of a beige solid, m.p. 230° C., which is used without further purification for the subsequent steps.

후처리

  1. temperatureis maintained at between 10° and 14° C
  2. customto rise to approximately 20° C.
  3. stirringthe mixture is stirred for 10 minutes at a temperature in the region of 20° C.
  4. filtrationfiltered through diatomaceous silica for filtration
  5. washwashed with water (2×250 cc)
  6. additiontreated with 35% strength aqueous hydrochloric acid solution (90 cc)
  7. customThe precipitate formed
  8. extractionis extracted with ethyl acetate (4×500 cc)
  9. washThe combined organic extracts are washed with water (3×500 cc)
  10. dry with materialdried over magnesium sulphate
  11. filtrationfiltered
  12. concentrationconcentrated under reduced pressure (20 kPa) at 50° C
  13. washwashed with ethyl ether (2×200 cc)

출처 및 근거

ORD 기록
ord-b0ad04efde7a49f78df658a55b94803b
출처 데이터셋
uspto-grants-1991_10
DOI
10.6084/m9.figshare.5104873.v1
특허 번호
US05053509

반응 노트

이 페이지에서참가 물질실험 절차후처리출처 및 근거반응 노트