홈MCP워크벤치Skills
홈워크벤치알림마이페이지
llms.txt · MCP 가이드개인정보처리방침 · 이용약관 · 지원v1.8.3
  1. 홈
  2. /반응

Chloral → Acetamide, 2-(hydroxyimino)-N-phenyl-

HRID 348405
인쇄

반응식

HRID 348405 반응식
[O:1]=[CH:2][C:3](Cl)(Cl)Cl.S([O-])([O-])(=O)=O.[Na+].[Na+].Cl.[NH2:15][OH:16].I[C:18]1[CH:23]=[CH:22][C:21]([NH2:24])=[CH:20][C:19]=1C>O>[CH:18]1[CH:23]=[CH:22][C:21]([NH:24][C:2](/[CH:3]=[N:15]/[OH:16])=[O:1])=[CH:20][CH:19]=1
참가 물질반응 조건실험 절차후처리출처 및 근거반응 노트

참가 물질

6

반응물 4

HCID 6407ChloralHCID 24436Sodium SulfateHCID 443297Hydroxyamine hydrochlorideHCID 27342754-Iodo-3-methylaniline

생성물 1

HCID 6861488Acetamide, 2-(hydroxyimino)-N-phenyl-

시약·촉매·용매 1

HCID 962Water용매3회

반응 조건

온도
95 °C

실험 절차

Chloral hyrdate (17.40 g) is dissolved in water (256 mL) with sodium sulfate (108.75 g). The solution is warmed to 60° C. whereupon hydroxylamine hydrochloride (19.95 g) in water (124 mL) was added. In a separate flask a slurry of 2-iodo 5-aminotoluene (commercially available, Buttpark Ltd, U.K.) in water (139 mL) and CHCl (7.87 mL) was prepared at 80° C. The mixtures were combined and the reaction temperature increased to 95° C. for 20 min. then cooled to room temperature and then at 0° C. for 5 min. The solids were collected by filtration and washed with water (250 mL) and dried under vacuum to afford isonitrosoacetanilide 2.1 as a tan solid. Conc. H2SO4 (75 mL) was warmed to 50° C. and isonitrosoacetanilide 2.1 was added portionwise so that the temperature did not go above 70° C. After the addition the temperature was raised to 80° C. for 10 min. and then the mixture was allowed to cool to ambient temperature and poured onto ice water (10–12× volume). The isatin was filtered and washed with cold water (4×500 mL). The 1:1 isomeric mixture was taken up in 2N NaOH solution (316 mL) and stirred for 2 h then filtered. The filtrate was acidified to approx. pH 6 with acetic acid and refiltered to remove the undesired isatin isomer. The filtrate was acidifed to pH 1 with conc. HCl and filtered and the precipitate (desired isomer 2.7 g) was washed with water and dried by suction. Isatin 2 was converted to the corresponding aldehyde (3.1) as for isatin 1.1 above.

후처리

  1. additionwas added
  2. temperaturethen cooled to room temperature
  3. filtrationThe solids were collected by filtration
  4. washwashed with water (250 mL)
  5. customdried under vacuum

출처 및 근거

ORD 기록
ord-2d3543efe88c4d699d5d64bd4e41fb40
출처 데이터셋
uspto-grants-2007_02
DOI
10.6084/m9.figshare.5104873.v1
특허 번호
US07176314B2

반응 노트

이 페이지에서참가 물질반응 조건실험 절차후처리출처 및 근거반응 노트