홈MCP워크벤치Skills
홈워크벤치알림마이페이지
llms.txt · MCP 가이드개인정보처리방침 · 이용약관 · 지원v1.8.0
  1. 홈
  2. /반응

Hydrochloric Acid → HCID 10910812, 화합물

HRID 376888
노트
인쇄 미리보기

반응식

HRID 376888 반응식
[OH:1][C:2]1[CH:3]=[C:4]([CH:8]2NN=[C:10]([C:13]3[CH:18]=[CH:17][CH:16]=[CH:15][CH:14]=3)[CH2:9]2)[CH:5]=[CH:6][CH:7]=1.[OH-].[Na+].Cl>O>[OH:1][C:2]1[CH:3]=[C:4]([CH:8]2[CH2:9][CH:10]2[C:13]2[CH:18]=[CH:17][CH:16]=[CH:15][CH:14]=2)[CH:5]=[CH:6][CH:7]=1
참가 물질반응 조건실험 절차후처리출처 및 근거반응 노트

참가 물질

5

반응물 3

HCID 313Hydrochloric AcidHCID 14798Sodium HydroxideHCID 23301565HCID 23301565, 화합물

생성물 1

HCID 10910812HCID 10910812, 화합물수율 58.2%

시약·촉매·용매 1

HCID 962Water용매

반응 조건

온도
250 °C

실험 절차

To a 250 ml round bottom flask equipped with nitrogen inlet, thermometer, and reflux condenser was charged 3.5 g (0.0147 moles) of 5-(3-hydroxyphenyl)-3-phenyl-2-pyrazoline, and 2.2 g (0.1 moles) of powdered sodium hydroxide. The two solids were mixed thoroughly, then heated slowly to 250° C., under a rapid steam of nitrogen. The reaction mixture was heated continuously at 250° C. for a total of 2 hours, then cooled to ambient temperature. The resulting residue was the dissolved in 200 mls of water, then acidified to pH 2 with 1N aqueous hydrochloric acid. The acidic solution was extracted with 3×100 mls of ethyl ether, and the ether extract was washed with 2×100 mls of water, and 100 mls of saturated aqueous sodium chloride solution. The ether extract was the dried over anhydrous magnesium sulfate, filtered and concentrated to dryness under reduced pressure with a rotary evaporator at 45° C. The resulting crude product was chromatographed on silica gel with a 15% ethyl acetate, 85% hexane mobile phase. The pure fractions were combined and concentrated under reduced pressure on a rotary evaporator to afford 1.8 g of the title compound 1-(3-hydroxyphenyl)-2-phenyl-cyclopropane as a pale yellow liquid in a 58% yield. 1H NMR (CDCl3, tms=0 ppm) 1.4(t,2H); 2.2(m,2H); 5.5(s,1H); 6.5-6.8(m,3H); 3.1-3.4(m,6H).

후처리

  1. customTo a 250 ml round bottom flask equipped with nitrogen inlet
  2. temperaturethermometer, and reflux condenser
  3. additionThe two solids were mixed thoroughly
  4. temperatureThe reaction mixture was heated continuously at 250° C. for a total of 2 hours
  5. temperaturecooled to ambient temperature
  6. extractionThe acidic solution was extracted with 3×100 mls of ethyl ether
  7. extractionthe ether extract
  8. washwas washed with 2×100 mls of water, and 100 mls of saturated aqueous sodium chloride solution
  9. extractionThe ether extract
  10. dry with materialdried over anhydrous magnesium sulfate
  11. filtrationfiltered
  12. concentrationconcentrated to dryness under reduced pressure with a rotary evaporator at 45° C
  13. customThe resulting crude product was chromatographed on silica gel with a 15% ethyl acetate, 85% hexane mobile phase
  14. concentrationconcentrated under reduced pressure on a rotary evaporator

출처 및 근거

ORD 기록
ord-f5bb91cb87dd4687953af460b5fd04f6
출처 데이터셋
uspto-grants-2000_02
DOI
10.6084/m9.figshare.5104873.v1
특허 번호
US06022891

반응 노트

불러오는 중…

이 페이지에서참가 물질반응 조건실험 절차후처리출처 및 근거반응 노트