홈MCP워크벤치Skills
홈워크벤치알림마이페이지
llms.txt · MCP 가이드개인정보처리방침 · 이용약관 · 지원v1.8.3
  1. 홈
  2. /반응

4-Methylmorpholine → (4-Bromo-2-chlorophenyl)methanol

HRID 387220
인쇄

반응식

HRID 387220 반응식
[Br:1][C:2]1[CH:10]=[CH:9][C:5]([C:6](O)=[O:7])=[C:4]([Cl:11])[CH:3]=1.ClC(OC(=O)C(C)C)=O.CN1CCOCC1.[BH4-].[Na+]>O1CCCC1.O>[Br:1][C:2]1[CH:10]=[CH:9][C:5]([CH2:6][OH:7])=[C:4]([Cl:11])[CH:3]=1
참가 물질반응 조건실험 절차후처리출처 및 근거반응 노트

참가 물질

7

반응물 4

HCID 79724-MethylmorpholineHCID 1088294-Bromo-2-chlorobenzoic acidHCID 4311764Sodium borohydrideHCID 21930983Isobutyryl chloroformate

생성물 1

HCID 43805739(4-Bromo-2-chlorophenyl)methanol수율 100%

시약·촉매·용매 2

HCID 962Water용매
HCID 8028Tetrahydrofuran용매

반응 조건

온도
-15 °C

실험 절차

4-Bromo-2-chlorobenzoic acid (14, 92.0 g, 0.39 mol) was dissolved in dry tetrahydrofuran (920 mL) and cooled to −15° C. Isobutyryl choroformate (51.0 mL, 0.39 mol) was added followed by N-methylmorpholine (43.5 mL, 0.39 mol). The resulting mixture was stirred for 10 minutes at −15° C., cooled to −25° C. and the precipitated N-methylmorpholine hydrochloride salt was filtered off. The filtrate was warmed to −5° C. and a solution of sodium borohydride (22.19 g, 0.586 mol) in water (190 mL) was added dropwise to the mixture keeping the temperature below 0° C. After stirring for 1 h at 0° C., the volatiles were evaporated, and the residue was diluted with water (500 mL) and dichloromethane (450 mL). The layers were separated and the aqueous layer was extracted with dichloromethane (150 mL). The combined organic layers were washed with water (150 mL), dried over sodium sulfate and evaporated. The product (86.1 g, 0.39 mol, 99%) was obtained as a white crystalline solid.

후처리

  1. temperaturecooled to −25° C.
  2. filtrationthe precipitated N-methylmorpholine hydrochloride salt was filtered off
  3. temperatureThe filtrate was warmed to −5° C.
  4. customthe temperature below 0° C
  5. stirringAfter stirring for 1 h at 0° C.
  6. customthe volatiles were evaporated
  7. additionthe residue was diluted with water (500 mL) and dichloromethane (450 mL)
  8. customThe layers were separated
  9. extractionthe aqueous layer was extracted with dichloromethane (150 mL)
  10. washThe combined organic layers were washed with water (150 mL)
  11. dry with materialdried over sodium sulfate
  12. customevaporated

출처 및 근거

ORD 기록
ord-77a4f13cf2ec48ffac0a69b6d9120db5
출처 데이터셋
uspto-grants-2013_02
DOI
10.6084/m9.figshare.5104873.v1
특허 번호
US08372970B2

반응 노트

이 페이지에서참가 물질반응 조건실험 절차후처리출처 및 근거반응 노트