홈MCP워크벤치Skills
홈워크벤치알림마이페이지
llms.txt · MCP 가이드개인정보처리방침 · 이용약관 · 지원v1.8.3
  1. 홈
  2. /반응

Benzaldehyde → Methyl 3-hydroxy-3-phenylpropanoate

HRID 394909
인쇄

반응식

HRID 394909 반응식
C[Si](C)(C)Cl.Br[CH2:7][C:8]([O:10][CH3:11])=[O:9].[CH:12](=[O:19])[C:13]1[CH:18]=[CH:17][CH:16]=[CH:15][CH:14]=1.Cl>C(OC(C)C)(=O)C.[Zn]>[OH:19][CH:12]([C:13]1[CH:18]=[CH:17][CH:16]=[CH:15][CH:14]=1)[CH2:7][C:8]([O:10][CH3:11])=[O:9]
참가 물질반응 조건실험 절차후처리출처 및 근거반응 노트

참가 물질

7

반응물 4

HCID 240BenzaldehydeHCID 313Hydrochloric AcidHCID 6397ChlorotrimethylsilaneHCID 60984Methyl bromoacetate

생성물 1

HCID 347841Methyl 3-hydroxy-3-phenylpropanoate

시약·촉매·용매 2

HCID 23994Zinc촉매2회
HCID 7915
Isopropyl Acetate
용매

반응 조건

온도
60 °C

실험 절차

At room temperature, a three-neck flask equipped with a reflux condenser, internal thermometer, dropping funnel and stirrer under nitrogen protective gas was initially charged with 7.6 g of zinc powder (115 mmol) in 45 ml of isopropyl acetate. After 1.83 ml of trimethylchlorosilane (14 mmol) had been added, the mixture was heated to 60° C. for 15 min, then allowed to cool to 55° C. and 16.3 g of undiluted methyl bromoacetate (107 mmol) were subsequently added dropwise within 5 min, and the temperature was maintained at 60° C. by external cooling. The mixture was then stirred at 50° C. for 15 min. After cooling to 30° C., 9.4 g of undiluted benzaldehyde (89 mmol) were added, and the temperature was maintained at 40° C. by external cooling. After stirring had been continued at 40° C. for 30 min, the mixture was cooled to 0° C., acidified with 20 ml of 20% hydrochloric acid to a pH of 1 and the mixture was stirred for 30 min, during which excess zinc dissolved. The organic phase was then removed. The organic phase was then stirred with 30 ml of concentrated ammonia solution at 0° C. for 10 min. After the phase separation, drying was effected over sodium sulfate and the solvent was distilled off under reduced pressure. Methyl 3-hydroxy-3-phenylpropionate was obtained in a yield of 14.3 g (89% of theory) and had a boiling point of 78° C. (0.08 mbar).

후처리

  1. customAt room temperature, a three-neck flask equipped with a reflux condenser
  2. temperatureto cool to 55° C.
  3. temperaturethe temperature was maintained at 60° C. by external cooling
  4. temperatureAfter cooling to 30° C.
  5. temperaturethe temperature was maintained at 40° C. by external cooling
  6. stirringAfter stirring
  7. waithad been continued at 40° C. for 30 min
  8. temperaturethe mixture was cooled to 0° C.
  9. dissolutiondissolved
  10. customThe organic phase was then removed
  11. stirringThe organic phase was then stirred with 30 ml of concentrated ammonia solution at 0° C. for 10 min
  12. customAfter the phase separation
  13. customdrying
  14. distillationthe solvent was distilled off under reduced pressure

출처 및 근거

ORD 기록
ord-69fff3ab6cd74af58c0925cfa6e4eeb3
출처 데이터셋
uspto-grants-2003_08
DOI
10.6084/m9.figshare.5104873.v1
특허 번호
US06603034B2

반응 노트

이 페이지에서참가 물질반응 조건실험 절차후처리출처 및 근거반응 노트