홈MCP워크벤치Skills
홈워크벤치알림마이페이지
llms.txt · MCP 가이드개인정보처리방침 · 이용약관 · 지원v1.8.3
  1. 홈
  2. /반응

Dimethylformamide → 2-Methyl-6-nitrobenzaldoxime

HRID 397142
인쇄

반응식

HRID 397142 반응식
CN(C=O)C.C[O-].[K+].[N+:9]([C:12]1[CH:17]=[CH:16][CH:15]=[C:14]([CH3:18])[C:13]=1[CH3:19])([O-:11])=[O:10].[N:20](OCCCC)=[O:21]>C(O)(=O)C.O>[CH3:18][C:14]1[CH:15]=[CH:16][CH:17]=[C:12]([N+:9]([O-:11])=[O:10])[C:13]=1[CH:19]=[N:20][OH:21]
참가 물질반응 조건실험 절차후처리출처 및 근거반응 노트

참가 물질

7

반응물 4

HCID 6228DimethylformamideHCID 67391,2-Dimethyl-3-nitrobenzeneHCID 10996Butyl nitriteHCID 23664618Potassium methoxide

생성물 1

HCID 853610482-Methyl-6-nitrobenzaldoxime

시약·촉매·용매 2

HCID 176Acetic Acid용매
HCID 962
Water
용매

반응 조건

온도
-40 °C

실험 절차

1200 ml of anhydrous DMF are initially charged in a 4 l reaction flask and cooled to −40° C. At this temperature, 336.5 g (4.56 mol) of potassium methoxide (95%) are added and suspended with stirring. A mixture of 300 g (1.92 mol) of 3-nitro-o-xylene (97%) and 274 g (2.52 mol) of n-butyl nitrite (95%) is then added dropwise at −40° C. over a period of 7 hours (if the mixture is cooled accordingly, the duration of this addition can be reduced as desired; a longer period of addition has not yet been tested; temperature variations between −35 and −45° C. are tolerated). The complete conversion of the starting material is checked by HPLC. The reaction discharge is then added with stirring, at from −5 to 0° C., to a mixture of 300 ml of water and 300 ml of glacial acetic acid. The reaction mixture is then poured onto 6 kg of ice-water and the solid is separated off by filtration (without any problems, filter resistance has not yet been determined) and washed twice with in each case 500 ml of water (careful: the crude product smells strongly). The crude product (HPLC: 96 area %) is purified by suspending the moist solid in 800 ml of toluene for 1.5 h. The solid is filtered off (without any problems, the filter resistance has not yet been determined) and dried at 50° C. in a vacuum drying cabinet.

후처리

  1. additionis then added dropwise at −40° C. over a period of 7 hours (if the mixture
  2. temperatureis cooled accordingly
  3. additionthe duration of this addition
  4. additiona longer period of addition
  5. customtemperature variations between −35 and −45° C.
  6. additionThe reaction discharge is then added
  7. customthe solid is separated off by filtration (without any problems
  8. filtrationfilter resistance
  9. washwashed twice with in each case 500 ml of water (careful: the crude product
  10. customThe crude product (HPLC: 96 area %) is purified
  11. customfor 1.5 h
  12. filtrationThe solid is filtered off (without any problems
  13. customdried at 50° C. in a vacuum
  14. customdrying cabinet

출처 및 근거

ORD 기록
ord-b46e73eccbac44979a6e1dda98dcd488
출처 데이터셋
uspto-grants-2003_08
DOI
10.6084/m9.figshare.5104873.v1
특허 번호
US06608209B2

반응 노트

이 페이지에서참가 물질반응 조건실험 절차후처리출처 및 근거반응 노트