홈MCP워크벤치Skills
홈워크벤치알림마이페이지
llms.txt · MCP 가이드개인정보처리방침 · 이용약관 · 지원v1.8.0
  1. 홈
  2. /반응

Hydrochloric Acid → Methyl 3-(4-fluoro-2-hydroxyphenyl)-3-oxopropanoate

HRID 409523
노트
인쇄 미리보기

반응식

HRID 409523 반응식
C[Si]([N-][Si](C)(C)C)(C)C.[Li+].[F:11][C:12]1[CH:17]=[CH:16][C:15]([C:18](=[O:20])[CH3:19])=[C:14]([OH:21])[CH:13]=1.[C:22](=O)([O:25]C)[O:23][CH3:24].Cl>O1CCCC1>[F:11][C:12]1[CH:17]=[CH:16][C:15]([C:18](=[O:20])[CH2:19][C:22]([O:23][CH3:24])=[O:25])=[C:14]([OH:21])[CH:13]=1
참가 물질반응 조건실험 절차후처리출처 및 근거반응 노트

참가 물질

6

반응물 4

HCID 313Hydrochloric AcidHCID 12021Dimethyl CarbonateHCID 2733832Lithium hexamethyldisilazaneHCID 27373264'-Fluoro-2'-hydroxyacetophenone

생성물 1

HCID 67155740Methyl 3-(4-fluoro-2-hydroxyphenyl)-3-oxopropanoate수율 64%

시약·촉매·용매 1

HCID 8028
Tetrahydrofuran
용매
3회

반응 조건

온도
-78 °C

실험 절차

A 1.0 M tetrahydrofuran solution of lithium bis(trimethylsilyl)amide (39.0 mL, 39.0 mmol) was stirred at −78° C. and treated over a 25 min period with a solution of 1-(4-fluoro-2-hydroxyphenyl)ethanone (2.00 g, 13.0 mmol) in 50 mL of tetrahydrofuran. The resulting solution was stirred at −78° C. for 1 h, and then at −15° C. for 2 h. After being cooled again to −78° C., the solution was treated with a solution of dimethyl carbonate (1.20 mL, 14.3 mmol) in tetrahydrofuran (5 mL). The resulting mixture was allowed to warm to rt where it stirred overnight. After this time, the mixture was poured over ice and then concentrated hydrochloric acid (10 mL) was added. The resulting mixture was extracted three times with dichloromethane. The combined organic phases were washed twice with water, dried over sodium sulfate and then concentrated under vacuum to yield a residue. The residue was purified by radial thin-layer chromatography (silica gel, 2-40% ethyl acetate-hexane) to provide methyl 3-(4-fluoro-2-hydroxyphenyl)-3-oxopropanoate as a white solid (1.76 g, 64%). 1H NMR (400 MHz, CDCl3) δ ppm 3.78 (s, 3 H) 3.98 (s, 2 H) 6.62-6.71 (m, 2 H) 7.69 (dd, J=8.9, 6.4 Hz, 1 H) 12.15 (d, J=1.5 Hz, 1 H). Mass spectrum m/z 213.14 (M+H)+.

후처리

  1. waitat −15° C. for 2 h
  2. temperatureAfter being cooled again to −78° C.
  3. temperatureto warm to rt where it
  4. stirringstirred overnight
  5. additionAfter this time, the mixture was poured over ice
  6. extractionThe resulting mixture was extracted three times with dichloromethane
  7. washThe combined organic phases were washed twice with water
  8. dry with materialdried over sodium sulfate
  9. concentrationconcentrated under vacuum
  10. customto yield a residue
  11. customThe residue was purified by radial thin-layer chromatography (silica gel, 2-40% ethyl acetate-hexane)

출처 및 근거

ORD 기록
ord-c0fc18ea2a074a6ca0ddb7742c995e18
출처 데이터셋
uspto-grants-2014_06
DOI
10.6084/m9.figshare.5104873.v1
특허 번호
US08759390B2

반응 노트

불러오는 중…

이 페이지에서참가 물질반응 조건실험 절차후처리출처 및 근거반응 노트