홈MCP워크벤치Skills
홈워크벤치알림마이페이지
llms.txt · MCP 가이드개인정보처리방침 · 이용약관 · 지원v1.8.3
  1. 홈
  2. /반응

Chloroform → 3,5-Difluorobenzamide mono-hydrate

HRID 445146
인쇄

반응식

HRID 445146 반응식
[F:1][C:2]1[CH:3]=[C:4]([CH:8]=[C:9]([F:11])[CH:10]=1)[C:5]([NH2:7])=[O:6].C(Cl)(Cl)Cl.[OH-].[Na+]>C(OC)(C)(C)C>[OH2:6].[F:1][C:2]1[CH:3]=[C:4]([CH:8]=[C:9]([F:11])[CH:10]=1)[C:5]([NH2:7])=[O:6]
참가 물질실험 절차후처리출처 및 근거반응 노트

참가 물질

5

반응물 3

HCID 6212ChloroformHCID 14798Sodium HydroxideHCID 27369103,5-Difluorobenzamide

생성물 1

HCID 1317306743,5-Difluorobenzamide mono-hydrate

시약·촉매·용매 1

HCID 15413tert-Butyl methyl ether용매

실험 절차

To a solution of (2S,3R)-N-2-((3-pyridinyl)methyl)-1-azabicyclo[2.2.2]oct-3-yl)-3,5-difluorobenzamide (993 mg, 2.80 mmol) water (5 mL) was added chloroform (15 mL). The pH of the aqueous layer was adjusted to pH=10-11 with 10 weight % sodium hydroxide. The biphasic mixture was shaken vigorously, and the layers were allowed to separate. The chloroform layer was isolated, and the aqueous layer was extracted once more with chloroform (9 mL). The combined chloroform layers were washed once with water (7 mL), filtered over a bed of anhydrous magnesium sulfate and concentrated in vacuo to afford a colorless, clear oil with a tendency to foam. The material was treated with methyl tert-butyl ether (MTBE, 10-15 mL) followed by solvent distillation in vacuo; this process was repeated once more. The material was dissolved in MTBE (10-15 mL) and heptane was added until a white cloudiness appeared. At this point a slow distillation of volatiles at 50-55° C. at ambient pressure was started and additional solid material separated out. The distillation was halted and the material was collected by filtration and washed with a small amount of heptane. The material was dried in vacuo at 55° C. under a vacuum/nitrogen bleed for 60 h and at 70-85° C. for 40 h to afford 400 mg of (2S,3R)-N-2-((3-pyridinyl)methyl)-1-azabicyclo[2.2.2]oct-3-yl)-3,5-difluorobenzamide mono-hydrate as a white brittle solid: αD26.6° C.=40°; elemental analysis, calc: C (63.99); H (6.18); N (11.19), H2O (4.8 weight %), found: C (64.23); H (6.27); N (11.18); H2O (4.48). 1H NMR (CDCl3, 400 MHz): δ 8.46 (d, J=2 Hz, 1H); 8.35 (dd, J=4.8 Hz, J=2 Hz, 1 H); 7.56-7.61 (m, 1H); 7.08-7.19 (m, 3H); 6.87-6.95 (m, 1H), 6.32 (d, J=8.1 Hz, 1H); 3.89-3.95 (m, 1H); 3.00-3.12 (m, 1H), 2.84-2.99 (m, 4H); 2.68-2.84 (m, 2H); 1.98-2.04 (m, 1H); 1.83 (s, 2H); 1.58-1.79 (m, 3H); 1.44-1.54 (m, 1H). Decomposes at 240° C.

후처리

  1. customto separate
  2. customThe chloroform layer was isolated
  3. extractionthe aqueous layer was extracted once more with chloroform (9 mL)
  4. washThe combined chloroform layers were washed once with water (7 mL)
  5. filtrationfiltered over a bed of anhydrous magnesium sulfate
  6. concentrationconcentrated in vacuo
  7. customto afford a colorless, clear oil with a tendency to foam
  8. distillationfollowed by solvent distillation in vacuo
  9. dissolutionThe material was dissolved in MTBE (10-15 mL)
  10. additionheptane was added until a white cloudiness
  11. distillationAt this point a slow distillation of volatiles at 50-55° C. at ambient pressure
  12. customadditional solid material separated out
  13. distillationThe distillation
  14. filtrationthe material was collected by filtration
  15. washwashed with a small amount of heptane
  16. customThe material was dried in vacuo at 55° C. under a vacuum/nitrogen

출처 및 근거

ORD 기록
ord-1392db00859e4dae9ded7ec205a051d0
출처 데이터셋
uspto-grants-2013_07
DOI
10.6084/m9.figshare.5104873.v1
특허 번호
US08476296B2

반응 노트

이 페이지에서참가 물질실험 절차후처리출처 및 근거반응 노트