홈MCP워크벤치Skills
홈워크벤치알림마이페이지
llms.txt · MCP 가이드개인정보처리방침 · 이용약관 · 지원v1.8.3
  1. 홈
  2. /반응

Hydrochloric Acid → 5-(tert-Butyl)-3,3-dimethyl-6-nitrobenzofuran-2(3H)-one

HRID 446146
인쇄

반응식

HRID 446146 반응식
Br[C:2]1[CH:7]=[C:6]([C:8]([CH3:11])([CH3:10])[CH3:9])[C:5]([N+:12]([O-:14])=[O:13])=[CH:4][C:3]=1[OH:15].C[O:17][C:18](O[Si](C)(C)C)=[C:19]([CH3:21])[CH3:20].Cl>CN(C=O)C.F[Zn]F>[C:8]([C:6]1[C:5]([N+:12]([O-:14])=[O:13])=[CH:4][C:3]2[O:15][C:18](=[O:17])[C:19]([CH3:21])([CH3:20])[C:2]=2[CH:7]=1)([CH3:11])([CH3:10])[CH3:9]
참가 물질반응 조건실험 절차후처리출처 및 근거반응 노트

참가 물질

6

반응물 3

HCID 313Hydrochloric AcidHCID 552336Silane, ((1-methoxy-2-methyl-1-propenyl)oxy)trimethyl-HCID 595441452-Bromo-4-tert-butyl-5-nitro-phenol

생성물 1

HCID 595441545-(tert-Butyl)-3,3-dimethyl-6-nitrobenzofuran-2(3H)-one

시약·촉매·용매 2

HCID 24551Zinc fluoride촉매
HCID 6228
Dimethylformamide
용매

반응 조건

온도
80 °C

실험 절차

Difluorozinc (6.093 g, 58.92 mmol) was added to a round bottomed flask, which was flushed with nitrogen. Pd(tBu3P)2 (2 g, 3.835 mmol) was then added under nitrogen stream. 2-Bromo-4-tert-butyl-5-nitro-phenol (16.15 g, 58.92 mmol) dissolved in DMF (80.75 mL) was then added to the flask. The reaction mixture was an orange suspension. (1-Methoxy-2-methyl-prop-1-enoxy)trimethylsilane (21.61 g, 25.13 mL, 117.8 mmol) was added to the mixture and the resulting mixture was heated to 80° C. and stirred for 16 h. When complete, the reaction mixture was cooled to ambient temperature and filtered through Celite®. The filter cake was washed with MTBE (536.0 mL) and water (893.3 mL) was added to the filtrate. The mixture was stirred for 15 min and settled for another 15 min. The layers were separated and 0.5M HCl (500 mL, 250.0 mmol) was added to the organic phase. The layers were separated and the organic layer was washed with water (500 mL). The layers were separated and the organic layer was washed with NaCl (500 mL; 8 wt %). The organic layer was separated and the solvent removed in vacuo. The crude product was obtained as a brown crystalline solid and was then purified through a silica plug, using hexane:MTBE 20:1-10:1 as an eluent. The fractions containing product were combined and the solvent removed in vacuo to give the pure product as a white crystalline solid. 1H-NMR (400 MHZ, DMSO-d6) δ 7.80 (s, 1H); 7.62 (s, 1H); 1.49 (s, 6H); 1.34 (s, 9H)

후처리

  1. customwhich was flushed with nitrogen
  2. additionwas then added to the flask
  3. temperatureWhen complete, the reaction mixture was cooled to ambient temperature
  4. filtrationfiltered through Celite®
  5. washThe filter cake was washed with MTBE (536.0 mL) and water (893.3 mL)
  6. additionwas added to the filtrate
  7. stirringThe mixture was stirred for 15 min
  8. waitsettled for another 15 min
  9. customThe layers were separated
  10. customThe layers were separated
  11. washthe organic layer was washed with water (500 mL)
  12. customThe layers were separated
  13. washthe organic layer was washed with NaCl (500 mL; 8 wt %)
  14. customThe organic layer was separated
  15. customthe solvent removed in vacuo
  16. customThe crude product was obtained as a brown crystalline solid
  17. customwas then purified through a silica plug
  18. additionThe fractions containing product
  19. customthe solvent removed in vacuo

출처 및 근거

ORD 기록
ord-d8b5d7c674d2431095fc4ba2ddbbc388
출처 데이터셋
uspto-grants-2013_07
DOI
10.6084/m9.figshare.5104873.v1
특허 번호
US08476442B2

반응 노트

이 페이지에서참가 물질반응 조건실험 절차후처리출처 및 근거반응 노트