홈MCP워크벤치Skills
홈워크벤치알림마이페이지
llms.txt · MCP 가이드개인정보처리방침 · 이용약관 · 지원v1.8.3
  1. 홈
  2. /반응

Styrene → Styrene

HRID 463789
인쇄

반응식

HRID 463789 반응식
[C:1]([O:4][C:5]1[CH:10]=[CH:9][C:8]([C:11]([CH3:13])=[CH2:12])=[CH:7][CH:6]=1)(=[O:3])[CH3:2].[CH2:14]=[CH:15][C:16]1[CH:21]=[CH:20][CH:19]=[CH:18][CH:17]=1.[N:22]#CBr>O.C(N(CC)CC)C.C(Cl)(Cl)Cl>[O-:4][C:5]#[N:22].[C:1]([O:4][C:5]1[CH:10]=[CH:9][C:8]([C:11]([CH3:13])=[CH2:12])=[CH:7][CH:6]=1)(=[O:3])[CH3:2].[CH2:14]=[CH:15][C:16]1[CH:21]=[CH:20][CH:19]=[CH:18][CH:17]=1
참가 물질실험 절차후처리출처 및 근거반응 노트

참가 물질

9

반응물 3

HCID 7501StyreneHCID 10476Cyanogen BromideHCID 12250212Phenol, 4-(1-methylethenyl)-, acetate

생성물 3

HCID 7501StyreneHCID 12250212Phenol, 4-(1-methylethenyl)-, acetateHCID 178513472HCID 178513472, 화합물

시약·촉매·용매 3

HCID 962
Water
용매
HCID 6212Chloroform용매
HCID 8471Triethylamine용매2회

실험 절차

An 88.0 gram portion of the hydrolyzed p-isopropenylphenyl acetate and styrene copolymer and 600 grams of chloroform were added to a reactor and maintained under a nitrogen atmosphere with stirring. The transparent viscous solution was coold to 0° C., then 34.96 grams of cyanogen bromide (0.30 mole) was added. Thirteen minutes (780 s) later, 34.96 grams of triethylamine (0.33 mole) was added to the reactor over a 31 minute (1860 s) period and so as to maintain the reaction temperature at -1° to 2° C. After completion of triethylamine addition, the reactor was maintained at 2° to 5° C. for an additional 30 minutes (1800 s), followed by addition of 1000 milliliters of chilled water to the reactor. After 15 minutes (900 s), the water and chloroform plus product layers were separated. The chloroform plus product layer was washed with 500 milliliters 5 percent aqueous hydrochloric acid and then dried over anhydrous sodium sulfate. Filtration provided a dry chloroform solution of cyanate of hydrolyzed p-isopropenylphenyl acetate and styrene copolymer. Infrared spectrophotometric analysis confirmed the product structure as indicated by the disappearance of phenolic hydroxyl group absorbance of the appearance of cyanate group absorbance.

후처리

  1. temperaturemaintained under a nitrogen atmosphere
  2. customwas coold to 0° C.
  3. temperatureso as to maintain the reaction temperature at -1° to 2° C
  4. temperaturethe reactor was maintained at 2° to 5° C. for an additional 30 minutes (1800 s)
  5. customthe water and chloroform plus product layers were separated
  6. washThe chloroform plus product layer was washed with 500 milliliters 5 percent aqueous hydrochloric acid
  7. dry with materialdried over anhydrous sodium sulfate
  8. filtrationFiltration

출처 및 근거

ORD 기록
ord-b75c2f09a8b04f7ebb5a58aad18c3105
출처 데이터셋
uspto-grants-1985_10
DOI
10.6084/m9.figshare.5104873.v1
특허 번호
US04544704

반응 노트

이 페이지에서참가 물질실험 절차후처리출처 및 근거반응 노트