홈MCP워크벤치Skills
홈워크벤치알림마이페이지
llms.txt · MCP 가이드개인정보처리방침 · 이용약관 · 지원v1.8.3
  1. 홈
  2. /반응

Water → Ethyl 5-methyl-3-oxohexanoate

HRID 463997
인쇄

반응식

HRID 463997 반응식
[CH2:1]([O:3][C:4](=[O:9])[CH2:5][C:6]([CH3:8])=[O:7])[CH3:2].N1C[CH2:13][CH2:12][CH2:11]1.O>C1(C)C=CC=CC=1>[CH2:1]([O:3][C:4](=[O:9])[CH2:5][C:6](=[O:7])[CH2:8][CH:12]([CH3:13])[CH3:11])[CH3:2]
참가 물질실험 절차후처리출처 및 근거반응 노트

참가 물질

5

반응물 3

HCID 962Water3회HCID 8868Ethyl AcetoacetateHCID 31268Pyrrolidine

생성물 1

HCID 96344Ethyl 5-methyl-3-oxohexanoate수율 82%

시약·촉매·용매 1

HCID 1140Toluene용매

실험 절차

26 g of acetoacetic acid ethyl ester and 15 g of pyrrolidine were boiled in 70 ml of toluene on a water separator until the theoretical quantity of water was separated. The solution was added drop by drop at -40° C. to a suspension of 8.6 g of sodium amide in 300 ml of liquid ammonia. By heating to room temperature, the ammonia was removed. After the reaction solution had been cooled again to 0° C., isopropyl iodide dissolved in 100 ml of toluene was added at the same temperature. The solution was allowed to react for 3 hours at 0° C. The reaction solution was poured into 200 ml of water. The phases were separated and the toluene of the organic phase was removed using a rotary evaporator. Of the residue, 1.2 g of the first runnings was then distilled off at 1.5 torr (2×102Pa) and up to a still temperature of 60° C., which contained above all 2 -isopropyl acetoacetic acid ethyl ester. The brownish oil remaining behind was dissolved in 70 ml of methylene chloride, and 21 g of concentrated hydrochloric acid was added. The material was hydrolyzed for 1.5 hours at ambient temperature. The two phases were separated. The organic phase was dried, the solvent was removed and the residue was distilled. 28.1 g of 5-methyl-3-oxohexanoic acid ethyl ester (82 percent) was obtained.

후처리

  1. customwas separated
  2. additionThe solution was added drop by drop at -40° C.
  3. additionto a suspension of 8.6 g of sodium amide in 300 ml of liquid ammonia
  4. customthe ammonia was removed
  5. temperatureAfter the reaction solution had been cooled again to 0° C.
  6. dissolutionisopropyl iodide dissolved in 100 ml of toluene
  7. additionwas added at the same temperature
  8. customto react for 3 hours at 0° C
  9. customThe phases were separated
  10. customthe toluene of the organic phase was removed
  11. customa rotary evaporator
  12. distillationOf the residue, 1.2 g of the first runnings was then distilled off at 1.5 torr (2×102Pa) and up to a still temperature of 60° C., which
  13. dissolutionThe brownish oil remaining behind was dissolved in 70 ml of methylene chloride
  14. addition21 g of concentrated hydrochloric acid was added
  15. customThe two phases were separated
  16. customThe organic phase was dried
  17. customthe solvent was removed
  18. distillationthe residue was distilled

출처 및 근거

ORD 기록
ord-e6cafcda54bf4939bac9480551fbc2f5
출처 데이터셋
uspto-grants-1985_10
DOI
10.6084/m9.figshare.5104873.v1
특허 번호
US04545934

반응 노트

이 페이지에서참가 물질실험 절차후처리출처 및 근거반응 노트