홈MCP워크벤치Skills
홈워크벤치알림마이페이지
llms.txt · MCP 가이드개인정보처리방침 · 이용약관 · 지원v1.8.3
  1. 홈
  2. /반응

Acetyl chloride → tert-Butyl 6a-isothiazol-5-yl-3,3a,4,6-tetrahydro-1H-pyrrolo[3,4-c]isoxazole-5-carboxylate

HRID 470235
인쇄

반응식

HRID 470235 반응식
C(Cl)(=O)C.[S:5]1[C:9]([C:10]23[CH2:17][N:16]([C:18]([O:20][C:21]([CH3:24])([CH3:23])[CH3:22])=[O:19])[CH2:15][CH:14]2[CH2:13][O:12][N:11]3CC2C=CC(OC)=CC=2)=[CH:8][CH:7]=[N:6]1.FC(F)(F)C(O)=O.O(C(OC(C)(C)C)=O)C(OC(C)(C)C)=O.CCCC(C)C.C(OCC)(=O)C>Cl.O1CCCC1.CC(OC)(C)C.C(Cl)Cl.C(O)(C)C>[S:5]1[C:9]([C:10]23[CH2:17][N:16]([C:18]([O:20][C:21]([CH3:24])([CH3:23])[CH3:22])=[O:19])[CH2:15][CH:14]2[CH2:13][O:12][NH:11]3)=[CH:8][CH:7]=[N:6]1
참가 물질반응 조건실험 절차후처리출처 및 근거반응 노트

참가 물질

11

반응물 5

HCID 6367Acetyl chlorideHCID 6422Trifluoroacetic acidHCID 90495Di-tert-butyl dicarbonateHCID 21882781Isohexane ethyl acetateHCID 86697924tert-Butyl 6a-isothiazol-5-yl-1-[(4-methoxyphenyl)methyl]-3,3a,4,6-tetrahydropyrrolo[3,4-c]isoxazole-5-carboxylate

생성물 1

HCID 86697926
tert-Butyl 6a-isothiazol-5-yl-3,3a,4,6-tetrahydro-1H-pyrrolo[3,4-c]isoxazole-5-carboxylate
수율 89.1%

시약·촉매·용매 5

HCID 313Hydrochloric Acid용매HCID 3776Isopropanol용매HCID 6344Dichloromethane용매HCID 8028Tetrahydrofuran용매HCID 15413tert-Butyl methyl ether용매

반응 조건

온도
45 °C

실험 절차

Isopropyl alcohol (5.66 L) is cooled to 5° C. and acetyl chloride (941.23 mL, 13.23 mol) is added drop wise (exothermic). The mixture is heated to 45° C., and tert-butyl 6a-isothiazol-5-yl-1-[(4-methoxyphenyl)methyl]-3,3a,4,6-tetrahydropyrrolo[3,4-c]isoxazole-5-carboxylate (460.17 g, 1.10 mol) is added to the reactor in portions. The resulting white suspension is stirred at 45° C. for 1 hour. Most of the solvent is evaporated to give a wet, off-white solid, which is dissolved in trifluoroacetic acid (2.76 L, 36.52 mol). The resulting dark solution is heated to 70° C. and stirred at this temperature for 1 hour. The reaction mixture is cooled to room temperature and concentrated under reduced pressure. The residue is azeotroped with toluene (2×2.5 L) to give a light brown solid. The residue is dissolved in 2 M aq. HCl solution (4.6 L) and DCM (4.6 L) and stirred vigorously at 40° C. for 30 minutes until full dissolution. The mixture is cooled to room temperature and separated. The aqueous layer is washed with DCM (2×500 mL). The acidic aqueous layer is cooled to 5° C. and the pH is adjusted to 10.5 by the addition of 50% wt/wt aq. NaOH solution. The mixture is cooled to 10° C. and a solution of BOC2O (252.57 g, 1.16 mol) in tetrahydrofuran (2.30 L) is added slowly. The mixture is stirred for 5 minutes and warmed to 25° C. and then stirred 1 hour longer. MTBE (2 L) is added and the resulting phases are separated. The aqueous layer is extracted with MTBE (2×1 L) and the combined organic layers are washed with brine solution (2 L), dried over MgSO4, filtered, and evaporated under reduced pressure to give the crude product as an off-white solid (347.2 g). The crude solid is dissolved in boiling 7:3 v/v isohexane/ethyl acetate (2.8 L) and the resulting clear solution is allowed to slowly cool to room temperature and then cooled in an ice-bath. The resulting white suspension is filtered and washed with cold 7:3 isohexane:ethyl acetate. The white solid is dried under vacuum and nitrogen for 2 days to give the title compound as a white solid (291.30 g, 88.9%). ES/MS (m/e): 298 (M+H).

후처리

  1. customMost of the solvent is evaporated
  2. customto give a wet, off-white solid, which
  3. temperatureThe resulting dark solution is heated to 70° C.
  4. stirringstirred at this temperature for 1 hour
  5. temperatureThe reaction mixture is cooled to room temperature
  6. concentrationconcentrated under reduced pressure
  7. customThe residue is azeotroped with toluene (2×2.5 L)
  8. customto give a light brown solid
  9. temperatureThe mixture is cooled to room temperature
  10. customseparated
  11. washThe aqueous layer is washed with DCM (2×500 mL)
  12. temperatureThe acidic aqueous layer is cooled to 5° C.
  13. additionthe pH is adjusted to 10.5 by the addition of 50% wt/wt aq. NaOH solution
  14. temperatureThe mixture is cooled to 10° C.
  15. stirringThe mixture is stirred for 5 minutes
  16. temperaturewarmed to 25° C.
  17. stirringstirred 1 hour longer
  18. customthe resulting phases are separated
  19. extractionThe aqueous layer is extracted with MTBE (2×1 L)
  20. washthe combined organic layers are washed with brine solution (2 L)
  21. dry with materialdried over MgSO4
  22. filtrationfiltered
  23. customevaporated under reduced pressure
  24. customto give the crude product as an off-white solid (347.2 g)
  25. dissolutionThe crude solid is dissolved
  26. temperatureto slowly cool to room temperature
  27. temperaturecooled in an ice-bath
  28. filtrationThe resulting white suspension is filtered
  29. washwashed with cold 7:3 isohexane
  30. customThe white solid is dried under vacuum and nitrogen for 2 days

출처 및 근거

ORD 기록
ord-daf2ea98297849dba44907655350bf3b
출처 데이터셋
uspto-grants-2014_01
DOI
10.6084/m9.figshare.5104873.v1
특허 번호
US08629270B2

반응 노트

이 페이지에서참가 물질반응 조건실험 절차후처리출처 및 근거반응 노트