홈MCP워크벤치Skills
홈워크벤치알림마이페이지
llms.txt · MCP 가이드개인정보처리방침 · 이용약관 · 지원v1.8.3
  1. 홈
  2. /반응

Hydrochloric Acid → 2-Methanesulfonylbenzene-1-sulfonyl chloride

HRID 479080
인쇄

반응식

HRID 479080 반응식
[CH3:1][S:2]([C:5]1[CH:11]=[CH:10][CH:9]=[CH:8][C:6]=1N)(=[O:4])=[O:3].[ClH:12].N([O-])=O.[Na+].[S:17](=[O:19])=[O:18]>O.Cl[Cu].CC(O)=O>[CH3:1][S:2]([C:5]1[CH:11]=[CH:10][CH:9]=[CH:8][C:6]=1[S:17]([Cl:12])(=[O:19])=[O:18])(=[O:4])=[O:3]
참가 물질반응 조건실험 절차후처리출처 및 근거반응 노트

참가 물질

8

반응물 4

HCID 313Hydrochloric AcidHCID 1119Sulfur DioxideHCID 2446592-MethanesulfonylanilineHCID 23668193Sodium Nitrite2회

생성물 1

HCID 27351782-Methanesulfonylbenzene-1-sulfonyl chloride수율 61%

시약·촉매·용매 3

HCID 62652Cuprous chloride
촉매
HCID 176Acetic Acid용매3회
HCID 962Water용매2회

반응 조건

온도
50 °C

실험 절차

2-Methylsulfonylaniline (48 g, 0.28 mole), was added portion-wise with stirring to 365 mL of water, 250 mL of conc. HCl and 60 mL of HOAc. The mixture was cooled to 50° C. and sodium nitrite (22.3 g; 0.32 mole) dissolved in 250 mL water, was added drop-wise with stirring maintaining the temperature between 0-5° C. After complete addition of sodium nitrite, the resulting solution was stirred for 30 minutes at 0-5° C. Sulfur dioxide was bubbled into 200 mL of glacial acetic acid at room temperature for 10 minutes CuCl2·2H2O (11 g; 0.06 mole) and CuCl (3.7 g; 0.037 mole) were added to the HOAc and cooled to 10° C. Sulfur dioxide was bubbled through the suspension for an additional 15 minutes and the diazotized amine was added portionwise with stirring keeping the temperature between 0-5° C. Sulfur dioxide was bubbled in continuously until the diazotized amine was added completely. After the complete addition of the diazotized amine, bubbling of SO2 was stopped and the green suspension was stirred at 0-5° C. for 3 hours. At the end of 3 hours, the suspension was diluted with water (300 mL), filtered and the solid washed three times with 50 mL of water. The product was dried at room temperature in vacuum (30 in. Hg) to give 46 g of 2-methylsulfonylbenzenesulfonyl chloride (61% yield) as a white solid. mp 135-137° C. (lit. 133-135° C.). 1H NMR (CDCl3) δ 8.3-8.6 (m, 2H), 7.87-8.02 (m, 2H), 3.41 (s, 3H). 13C NMR (CDCl3) δ 142.94, 139.24, 136.61, 135.22, 133.58, 132.13, 45.49. CIMS (m/e) 255 (M+H+, 100%).

후처리

  1. additionwas added drop-wise
  2. temperaturemaintaining the temperature between 0-5° C
  3. stirringthe resulting solution was stirred for 30 minutes at 0-5° C
  4. temperaturecooled to 10° C
  5. customSulfur dioxide was bubbled through the suspension for an additional 15 minutes
  6. additionthe diazotized amine was added portionwise
  7. stirringwith stirring
  8. custombetween 0-5° C
  9. customSulfur dioxide was bubbled in continuously until the diazotized amine
  10. additionwas added completely
  11. additionAfter the complete addition of the diazotized amine
  12. custombubbling of SO2
  13. stirringthe green suspension was stirred at 0-5° C. for 3 hours
  14. additionAt the end of 3 hours, the suspension was diluted with water (300 mL)
  15. filtrationfiltered
  16. washthe solid washed three times with 50 mL of water
  17. customThe product was dried at room temperature in vacuum (30 in. Hg)

출처 및 근거

ORD 기록
ord-e5dfb8d0ea044e548501a9825f411bfd
출처 데이터셋
uspto-grants-2003_11
DOI
10.6084/m9.figshare.5104873.v1
특허 번호
US06642416B2

반응 노트

이 페이지에서참가 물질반응 조건실험 절차후처리출처 및 근거반응 노트