Dimethylformamide → 2-Methyl-6-nitrobenzaldoxime

HRID 49663

반응식

HRID 49663 반응식
CN(C=O)C.C[O-].[K+].[N+:9]([C:12]1[CH:17]=[CH:16][CH:15]=[C:14]([CH3:18])[C:13]=1[CH3:19])([O-:11])=[O:10].[N:20](OCCCC)=[O:21]>C(O)(=O)C.O>[CH3:18][C:14]1[CH:15]=[CH:16][CH:17]=[C:12]([N+:9]([O-:11])=[O:10])[C:13]=1[CH:19]=[N:20][OH:21]

참가 물질

7

반응물 4

HCID 6228DimethylformamideHCID 67391,2-Dimethyl-3-nitrobenzeneHCID 10996Butyl nitriteHCID 23664618Potassium methoxide

생성물 1

HCID 853610482-Methyl-6-nitrobenzaldoxime

시약·촉매·용매 2

HCID 176Acetic Acid용매HCID 962Water용매

반응 조건

온도
-40 °C

실험 절차

1200 ml of anhydrous DMF are initially charged in a 4 l reaction flask and cooled to −40° C. At this temperature, 336.5 g (4.56 mol) of potassium methoxide (95%) are added with stirring and suspended. A mixture of 300 g (1.92 mol) of 3-nitro-o-xylene (97%) and 274 g (2.52 mol) of n-butyl nitrite (95%) is subsequently added dropwise at −40° C. over a period of 7 hours (if the mixture is cooled appropriately, the duration of this addition can be reduced at will; an extension has hitherto not been examined; temperature variations between −35 and −45° C. can be tolerated). By HPLC, it is checked that the starting material has been converted completely. The reaction discharge is subsequently added with stirring to a mixture of 300 ml of water and 300 ml of glacial acetic acid, at from −5 to 0° C. The reaction mixture is then poured into 6 kg of ice-water and the solid is separated off by filtration (without any problems, the flow resistance has not yet been determined) and washed twice with 500 ml of water each time (caution: the crude product smells strongly). The crude product (HPLC: 96 area %) is purified by suspending the moist solid in 800 ml of toluene for 1.5 h. The solid is filtered off (without any problems, the flow resistance has not yet been determined) and dried in a vacuum drying cabinet at 50° C.

후처리

  1. additionis subsequently added dropwise at −40° C. over a period of 7 hours (if the mixture
  2. temperatureis cooled appropriately
  3. additionthe duration of this addition
  4. customtemperature variations between −35 and −45° C.
  5. additionThe reaction discharge is subsequently added
  6. customthe solid is separated off by filtration (without any problems
  7. washwashed twice with 500 ml of water each time (caution
  8. customThe crude product (HPLC: 96 area %) is purified
  9. customfor 1.5 h
  10. filtrationThe solid is filtered off (without any problems
  11. customdried in a vacuum
  12. customdrying cabinet at 50° C.

출처 및 근거

ORD 기록
ord-ba20e344dac4485885d71f806c79d828
출처 데이터셋
uspto-grants-2004_03
특허 번호
US06706886B2

연결된 노트

불러오는 중…