홈MCP워크벤치Skills
홈워크벤치알림마이페이지
llms.txt · MCP 가이드개인정보처리방침 · 이용약관 · 지원v1.8.3
  1. 홈
  2. /반응

Methacrylic Acid → Methacrylic acid ethylene oxide

HRID 539444
인쇄

반응식

HRID 539444 반응식
[Na:1].[CH2:2]1[O:4][CH2:3]1.[C:5]([OH:10])(=[O:9])[C:6]([CH3:8])=[CH2:7].[CH2:11]=[CH:12][C:13]1[CH:18]=[CH:17][CH:16]=[CH:15][CH:14]=1.[C:19]([OH:24])(=[O:23])[C:20]([CH3:22])=[CH2:21].[C:25]([O:29][CH2:30][CH2:31][CH2:32][CH3:33])(=[O:28])[CH:26]=[CH2:27].S(OOS([O-])(=O)=O)([O-])(=O)=O.[NH4+].[NH4+]>O>[CH:11]([CH2:7][C:6](=[CH2:8])[C:5]([O-:10])=[O:9])=[CH:12][C:13]1[CH:18]=[CH:17][CH:16]=[CH:15][CH:14]=1.[C:25]([O:29][CH2:30][CH2:31][CH2:32][CH3:33])(=[O:28])[CH:26]=[CH2:27].[Na:1].[CH2:3]1[O:4][CH2:2]1.[C:19]([OH:24])(=[O:23])[C:20]([CH3:22])=[CH2:21]
참가 물질반응 조건실험 절차후처리출처 및 근거반응 노트

참가 물질

9

반응물 6

HCID 4093Methacrylic AcidHCID 7501StyreneHCID 8846Butyl AcrylateHCID 62648Ammonium Persulfate2회HCID 5360545SodiumHCID 21880491Methacrylic acid ethylene oxide

생성물 2

HCID 21880491
Methacrylic acid ethylene oxide
HCID 86659248Styrene-methacrylate butyl acrylate sodium

시약·촉매·용매 1

HCID 962Water용매

반응 조건

온도
75 °C

실험 절차

Into a reaction vessel equipped with a stirring rod and a thermometer, 683 parts by mass of water, 11 parts by mass of sodium salt of methacrylic acid ethylene oxide adduct sulfate ester (ELEMINOL RS-30, manufactured by Sanyo Chemical Industries, Ltd.), 10 parts by mass of polylactic acid, 60 parts by mass of styrene, 100 parts by mass of methacrylic acid, 70 parts by mass of butyl acrylate, and 1 part by mass of ammonium persulfate were charged and then stirred at 1,500 rpm for 20 minutes, to thereby obtain a white emulsion. Then, the temperature of the reaction system was raised to 75° C. by heating and reacted for 3 hours. Further, 30 parts by mass of a 1% by mass aqueous ammonium persulfate solution was added to the reaction system and aged at 65° C. for 12 hours, to thereby obtain an aqueous dispersion liquid of a vinyl resin (a copolymer of styrene-methacrylate-butyl acrylate-sodium salt of methacrylic acid ethylene oxide adduct sulfate ester), i.e., Fine Particle Dispersion Liquid 6. The volume average particle diameter of Fine Particle Dispersion Liquid 6 was 720 nm as measured with a particle size distribution measurement device (LA-920, manufactured by HORIBA, Ltd.). A part of Fine Particle Dispersion Liquid 6 was dried so that the resin part was isolated therefrom. The resin part had Tg of 57° C., and a weight average molecular weight of 120,000.

후처리

  1. customInto a reaction vessel equipped with a stirring rod
  2. customto thereby obtain a white emulsion
  3. temperatureby heating
  4. customreacted for 3 hours
  5. waitaged at 65° C. for 12 hours

출처 및 근거

ORD 기록
ord-8acb14c76efb4425b52e83283980853b
출처 데이터셋
uspto-grants-2014_10
DOI
10.6084/m9.figshare.5104873.v1
특허 번호
US08871418B2

반응 노트

이 페이지에서참가 물질반응 조건실험 절차후처리출처 및 근거반응 노트