홈MCP워크벤치Skills
홈워크벤치알림마이페이지
llms.txt · MCP 가이드개인정보처리방침 · 이용약관 · 지원v1.8.0
  1. 홈
  2. /반응

Hydrochloric Acid → 4'-Methoxy-3-phenylpropiophenone

HRID 556029
노트
인쇄 미리보기

반응식

HRID 556029 반응식
[C:1]1([CH2:7][CH2:8][C:9](Cl)=[O:10])[CH:6]=[CH:5][CH:4]=[CH:3][CH:2]=1.[CH3:12][O:13][C:14]1[CH:19]=[CH:18][CH:17]=[CH:16][CH:15]=1.[Al+3].[Cl-].[Cl-].[Cl-].Cl>ClCCl.O>[CH3:12][O:13][C:14]1[CH:19]=[CH:18][C:17]([C:9](=[O:10])[CH2:8][CH2:7][C:1]2[CH:6]=[CH:5][CH:4]=[CH:3][CH:2]=2)=[CH:16][CH:15]=1
참가 물질실험 절차후처리출처 및 근거반응 노트

참가 물질

7

반응물 4

HCID 313Hydrochloric AcidHCID 7519AnisoleHCID 64801Benzenepropanoyl chlorideHCID 6451240Aluminum(III) Chloride

생성물 1

HCID 2455544'-Methoxy-3-phenylpropiophenone

시약·촉매·용매 2

HCID 962Water용매
HCID 6344
Dichloromethane
용매
2회

실험 절차

To a 500 ml three-necked flask provided with a mechanical agitator and a thermometer were added a solution of 22.4 g (133.2 mmol) in theoretical amount of 3-phenylpropionyl chloride which was prepared in the step 1, dissolved in 100 ml dichloromethane, 14.4 g (205.9 mmol) methylphenyl ether and 150 ml dichloromethane, the mixture was cooled in an ice salt bath to lower than −5° C., while maintaining the inside temperature at −5° C. to −10° C., 17.8 g (133.2 mmol) anhydrous AlCl3 was added portionwise, upon the completion of addition. The mixture was stirred at this temperature for 1 hour and then at room temperature for 1 hour, the resultant was poured under stirring into a mixture of 100 g ice, 100 g water and 40 ml concentrated hydrochloric acid, the organic layer was separated, and the aqueous layer was extracted with dichloromethane twice ×20 ml, the organic layers were combined and washed with saturated brine, then with saturated aqueous sodium bicarbonate solution, and then with saturated brine until neutrality, dried over anhydrous magnesium sulfate, filtrated and concentrated under a reduced pressure to obtain a crude product, which was recrystallized with petroleum ether and ethyl acetate (2:1) to obtain a 23.5 g product, the mother liquid was concentrated and recrystallized to obtain a 3.3 g product in a yield of 83.7% in total, mp: 96-97□. 1H-NMR (CDCl3, 400 MHz) δ: 3.05 (2H, t, J=8.16 Hz), 3.25 (2H, t, J=8.16 Hz), 3.86 (3H, s, OCH3), 6.92 (2H, d, J=9.00 Hz, ArH), 7.18˜7.32 (5H, m, ArH), 7.94 (2H, d, J=9.00 Hz, ArH); EI-MS m/e (%): 240.1 (M+, 37), 135 (100).

후처리

  1. customTo a 500 ml three-necked flask provided with a mechanical agitator
  2. customwas prepared in the step 1
  3. temperaturewhile maintaining the inside temperature at −5° C. to −10° C.
  4. waitat room temperature for 1 hour
  5. additionthe resultant was poured
  6. customthe organic layer was separated
  7. extractionthe aqueous layer was extracted with dichloromethane twice ×20 ml
  8. washwashed with saturated brine
  9. dry with materialwith saturated aqueous sodium bicarbonate solution, and then with saturated brine until neutrality, dried over anhydrous magnesium sulfate
  10. filtrationfiltrated
  11. concentrationconcentrated under a reduced pressure
  12. customto obtain a crude product, which
  13. customwas recrystallized with petroleum ether and ethyl acetate (2:1)

출처 및 근거

ORD 기록
ord-285b51b0e8ec4107a435fce619d898b4
출처 데이터셋
uspto-grants-2011_11
DOI
10.6084/m9.figshare.5104873.v1
특허 번호
US08053581B2

반응 노트

불러오는 중…

이 페이지에서참가 물질실험 절차후처리출처 및 근거반응 노트