홈MCP워크벤치Skills
홈워크벤치알림마이페이지
llms.txt · MCP 가이드개인정보처리방침 · 이용약관 · 지원v1.8.3
  1. 홈
  2. /반응

Benzaldehyde → methyl (3S)-3-hydroxy-3-phenylpropanoate

HRID 584100
인쇄

반응식

HRID 584100 반응식
C[Si](C)(C)Cl.Br[CH2:7][C:8]([O:10][CH3:11])=[O:9].C1C[C@H]2N(C[C@H]3[C@@H]4CCCCN4C[C@@H]2C3)CC1.[CH:29](=[O:36])[C:30]1[CH:35]=[CH:34][CH:33]=[CH:32][CH:31]=1.Cl>O1CCCC1.[Zn].O>[OH:36][C@H:29]([C:30]1[CH:35]=[CH:34][CH:33]=[CH:32][CH:31]=1)[CH2:7][C:8]([O:10][CH3:11])=[O:9]
참가 물질반응 조건실험 절차후처리출처 및 근거반응 노트

참가 물질

9

반응물 5

HCID 240BenzaldehydeHCID 313Hydrochloric AcidHCID 6397ChlorotrimethylsilaneHCID 60984Methyl bromoacetateHCID 644020Sparteine

생성물 1

HCID 6993014methyl (3S)-3-hydroxy-3-phenylpropanoate

시약·촉매·용매 3

HCID 23994
Zinc
촉매
HCID 962Water용매
HCID 8028Tetrahydrofuran용매2회

반응 조건

온도
45 °C

실험 절차

At room temperature, a three-neck flask equipped with a reflux condenser, internal thermometer, dropping funnel and stirrer under protective nitrogen gas was initially charged with 5 g of zinc dust (77 mmol) in 30 ml of tetrahydrofuran. After 1.2 ml of trimethylchlorosilane had been added, the mixture was heated to 55 C for 15 min, and 10.9 g of methyl bromoacetate (71 mmol) were subsequently added dropwise undiluted while refluxing at 45° C. within 7 min. The mixture was then stirred for 10 min. After cooling to 10 C, 30 ml of tetrahydrofuran were added and 17 g of (−)-sparteine (72 mmol) were subsequently added undiluted at 0 C, and the temperature rose to 5 C. The mixture was cooled to 15 C and 6.4 g of benzaldehyde (60 mmol) were added undiluted. The reaction mixture was subsequently stirred at 15 C for 20 h, then acidified at this temperature with 35 ml of 20% hydrochloric acid to a pH of 3 and stirred for 10 min, and the temperature of the mixture rose to 0 C. 150 ml of water were then added. Precipitated sparteine salt was filtered off with suction and washed twice with 40 ml of ethyl acetate each time. After removing the organic phase, the aqueous phase was extracted with 50 ml of ethyl acetate and the organic phase was subsequently removed. The organic phase was then stirred with 20 ml of concentrated ammonia solution at −10° C. for 5 min. After phase separation, drying and removal of solvent under reduced pressure, methyl (S)-(−)-3-hydroxy-3-phenylpropionate was obtained in a yield of 10.5 g (97% of theory) and a purity of >95% and 89% ee (HPLC).

후처리

  1. customAt room temperature, a three-neck flask equipped with a reflux condenser
  2. temperaturethe mixture was heated to 55 C for 15 min
  3. additionwere added
  4. additionwere added
  5. stirringThe reaction mixture was subsequently stirred at 15 C for 20 h
  6. stirringstirred for 10 min
  7. filtrationPrecipitated sparteine salt was filtered off with suction
  8. washwashed twice with 40 ml of ethyl acetate each time
  9. customAfter removing the organic phase
  10. extractionthe aqueous phase was extracted with 50 ml of ethyl acetate
  11. customthe organic phase was subsequently removed
  12. stirringThe organic phase was then stirred with 20 ml of concentrated ammonia solution at −10° C. for 5 min
  13. customAfter phase separation
  14. customdrying
  15. customremoval of solvent under reduced pressure

출처 및 근거

ORD 기록
ord-8726ead476b241dab44fd3853ba3c118
출처 데이터셋
uspto-grants-2005_08
DOI
10.6084/m9.figshare.5104873.v1
특허 번호
US06924386B2

반응 노트

이 페이지에서참가 물질반응 조건실험 절차후처리출처 및 근거반응 노트