홈MCP워크벤치Skills
홈워크벤치알림마이페이지
llms.txt · MCP 가이드개인정보처리방침 · 이용약관 · 지원v1.8.3
  1. 홈
  2. /반응

Water → Nookatone

HRID 625169
인쇄

반응식

HRID 625169 반응식
[CH3:1][C@H:2]1[C@:7]2([CH3:15])[CH2:8][C@H:9]([C:12]([CH3:14])=[CH2:13])[CH2:10][CH2:11][C:6]2=[CH:5][CH2:4][CH2:3]1.O=O.C([O:22]O)(C)(C)C.O>C1(C)C=CC=CC=1.C(O)(C)(C)C>[CH3:1][CH:2]1[C:7]2([CH3:15])[CH2:8][CH:9]([C:12]([CH3:14])=[CH2:13])[CH2:10][CH2:11][C:6]2=[CH:5][C:4](=[O:22])[CH2:3]1
참가 물질반응 조건실험 절차후처리출처 및 근거반응 노트

참가 물질

7

반응물 4

HCID 962WaterHCID 977OxygenHCID 6410tert-Butyl hydroperoxideHCID 9855795Valencene2회

생성물 1

HCID 20797Nookatone수율 34%

시약·촉매·용매 2

HCID 1140Toluene용매
HCID 6386
tert-Butanol
용매

반응 조건

온도
45 °C

실험 절차

Silica phosphonate chromium (III) resin (48.9 g, PhosphonicS, Ltd.) was placed in a 5 L round bottom flask equipped with a condenser, thermowell, overhead stirrer, and sparge tube. Two (2) L of t-butanol and valencene distillate (68%, 500 g, 1.67 moles, 1 eq) were added, the contents were heated to 45° C., and the heterogeneous suspension was allowed to stir as oxygen was sparged through the solution (ca 1.5 L/min) and nitrogen flushed over the head-space. 70% t-butyl hydroperoxide in water (TBHP, 315 g, 2.45 moles, 1.47 eq) was added to the solution over 2 hrs while the temperature of the reaction was heated and maintained at 60±5° C. The reaction was allowed to stir until >90% of the valencene was consumed, as determined by gas chromatography. The reaction was then allowed to cool to room temperature and the silica catalyst removed by filtration. The flask and resin were washed with 500 mL isopropanol. One (1) L of deionized water was added to the combined organic solution (t-butanol and isopropanol), and the mixture was concentrated under reduced pressure by evaporation to afford an amber colored oil. The oil was dissolved in 3 L of toluene and washed with 3.125 L of 15% sulfuric acid for 15 minutes with vigorous agitation. The aqueous layer was removed and re-extracted with 1 L of toluene. The combined toluene layers were then washed three times with 2.5 L of 1 M sodium hydroxide, twice with 500 mL saturated sodium chloride, and dried over anhydrous magnesium sulfate. After filtration, the solvent was removed under reduced pressure by evaporation to afford 378 g of viscous amber oil (33% nootkatone by weight, 0.57 moles, 34% yield).

후처리

  1. customSilica phosphonate chromium (III) resin (48.9 g, PhosphonicS, Ltd.) was placed in a 5 L round bottom flask
  2. customequipped with a condenser
  3. customthermowell, overhead stirrer, and sparge tube
  4. customwas sparged through the solution (ca 1.5 L/min) and nitrogen
  5. customflushed over the head-space
  6. temperaturewas heated
  7. temperaturemaintained at 60±5° C
  8. customwas consumed
  9. temperatureto cool to room temperature
  10. customthe silica catalyst removed by filtration
  11. washThe flask and resin were washed with 500 mL isopropanol
  12. additionOne (1) L of deionized water was added to the combined organic solution (t-butanol and isopropanol)
  13. concentrationthe mixture was concentrated under reduced pressure by evaporation
  14. customto afford an amber colored oil
  15. washwashed with 3.125 L of 15% sulfuric acid for 15 minutes with vigorous agitation
  16. customThe aqueous layer was removed
  17. extractionre-extracted with 1 L of toluene
  18. washThe combined toluene layers were then washed three times with 2.5 L of 1 M sodium hydroxide
  19. dry with materialtwice with 500 mL saturated sodium chloride, and dried over anhydrous magnesium sulfate
  20. filtrationAfter filtration
  21. customthe solvent was removed under reduced pressure by evaporation

출처 및 근거

ORD 기록
ord-ed72c239c218440b8a8a965c4c78452b
출처 데이터셋
uspto-grants-2016_04
DOI
10.6084/m9.figshare.5104873.v1
특허 번호
US09303252B2

반응 노트

이 페이지에서참가 물질반응 조건실험 절차후처리출처 및 근거반응 노트