Acetone → 4-methoxy-3H-furo[3,4-c]pyridin-1-one

온도

50 °C

To a stirred solution of 19.40 g crude 3-hydroxy-2-isopropyl-4-methoxy-2,3-dihydro-pyrrolo[3,4-c]pyridin-1-one (87.29 mmol), as obtainable from example 14, in 300 mL isopropanol and 100 mL water were added at room temperature 5.160 g NaBH4 (130.9 mmol, 1.5 eq). After 3 h (<1.0% area 3-hydroxy-2-isopropyl-4-methoxy-2,3-dihydro-pyrrolo[3,4-c]pyridin-1-one), the reduction was quenched at 0° C. by addition of 34.0 mL acetone (474.4 mmol, 5.3 eq) and stirring was continued for 35 min at room temperature. The mixture was poured on 415 mL aqueous HCl (2.0 M, 829.3 mmol, 9.5 eq) at 0° C. and stirring was continued for 20 min at room temperature. The mixture was then heated to 50° C. overnight and was subsequently cooled to 0° C. Dipotassium hydrogen phosphate was added in order to adjust pH 3.0 and ca. 95% of the isopropanol were removed in a rotary evaporator (40° C./10 mbar). Water was added until the salts were dissolved and the mixture was extracted three times with 300 mL, in total 900 mL dichloromethane. The combined organic phases were dried over 50 g Na2SO4 (30 min) and filtered. The solid was washed with 100 mL dichloromethane. After evaporation of solvent in a rotary evaporator (40° C./25 mbar), the crude product (9.963 g, 69% w/w) was obtained as a light brown solid (HPLC purity 80.7% area). Purification was achieved by trituration with 30 mL ethyl acetate for 24 h at room temperature and subsequent addition of 60 mL heptane. The suspension was then allowed to stand for 24 h at 5° C. yielding the title product (5.486 g, 33.22 mmol, 40% w/w (68% over 2 steps), HPLC purity 95.1% area) as a beige solid.

1. stirringstirring
2. waitwas continued for 20 min at room temperature
3. temperaturewas subsequently cooled to 0° C
4. customwere removed in a rotary evaporator (40° C./10 mbar)
5. additionWater was added until the salts
6. dissolutionwere dissolved
7. extractionthe mixture was extracted three times with 300 mL
8. dry with materialThe combined organic phases were dried over 50 g Na2SO4 (30 min)
9. filtrationfiltered
10. washThe solid was washed with 100 mL dichloromethane
11. customAfter evaporation of solvent
12. customin a rotary evaporator (40° C./25 mbar)
13. customthe crude product (9.963 g, 69% w/w) was obtained as a light brown solid (HPLC purity 80.7% area)
14. customPurification
15. waitwas achieved by trituration with 30 mL ethyl acetate for 24 h at room temperature
16. additionsubsequent addition of 60 mL heptane
17. waitto stand for 24 h at 5° C.

ORD 기록

ord-51192b15b23f45338855116998cc58ef

출처 데이터셋

uspto-grants-2010_04

DOI

10.6084/m9.figshare.5104873.v1

특허 번호

US07705155B2