홈MCP워크벤치Skills
홈워크벤치알림마이페이지
llms.txt · MCP 가이드개인정보처리방침 · 이용약관 · 지원v1.8.3
  1. 홈
  2. /반응

Hydrochloric Acid → Biphenyl-2-ylcarbamic Acid Piperidin-4-yl Ester

HRID 724561
인쇄

반응식

HRID 724561 반응식
OC1CCN(CC2C=CC=CC=2)CC1.C([N:22]1[CH2:27][CH2:26][CH:25]([O:28][C:29](=[O:43])[NH:30][C:31]2[CH:36]=[CH:35][CH:34]=[CH:33][C:32]=2[C:37]2[CH:42]=[CH:41][CH:40]=[CH:39][CH:38]=2)[CH2:24][CH2:23]1)C1C=CC=CC=1.Cl.C([O-])=O.[NH4+]>C(O)C>[NH:22]1[CH2:23][CH2:24][CH:25]([O:28][C:29](=[O:43])[NH:30][C:31]2[CH:36]=[CH:35][CH:34]=[CH:33][C:32]=2[C:37]2[CH:42]=[CH:41][CH:40]=[CH:39][CH:38]=2)[CH2:26][CH2:27]1
참가 물질반응 조건실험 절차후처리출처 및 근거반응 노트

참가 물질

6

반응물 4

HCID 313Hydrochloric AcidHCID 784611-Benzylpiperidin-4-olHCID 2723923Ammonium formateHCID 105003691-benzyl-4-piperidyl N-(2-biphenylyl)carbamate

생성물 1

HCID 10851461Biphenyl-2-ylcarbamic Acid Piperidin-4-yl Ester수율 100%

시약·촉매·용매 1

HCID 702
Ethanol
용매

반응 조건

온도
50 °C

실험 절차

Biphenyl-2-isocyanate (97.5 g, 521 mmol) and 4-hydroxy-1-benzylpiperidine (105 g, 549 mmol), both commercially-available from Aldrich, Milwaukee, Wis., were heated together at 70° C. for 12 h, during which time the formation of biphenyl-2-ylcarbamic acid 1-benzylpiperidin-4-yl ester was monitored by LCMS. The reaction mixture was then cooled to 50° C. and ethanol (1 L) was added, and then 6M hydrochloric acid (191 mL) was added slowly. The reaction mixture was then cooled to ambient temperature and ammonium formate (98.5 g, 1.56 mol) was added and nitrogen gas was bubbled through the solution vigorously for 20 min. Palladium (10 wt. % (dry basis) on activated carbon) (20 g) was then added. The reaction mixture was heated at 40° C. for 12 h and then filtered through a pad of Celite. The solvent was then removed under reduced pressure and 1M hydrochloric acid (40 mL) was added to the crude residue. Sodium hydroxide (10N) was then added to adjust the pH to 12. The aqueous layer was extracted with ethyl acetate (2×150 mL) and dried (magnesium sulfate), and then the solvent was removed under reduced pressure to give the title compound (155 g, 100%). HPLC (10–70) Rt=2.52; MS m/z: [M+H+] calc'd for C18H20N2O2 297.15; found 297.3.

후처리

  1. temperatureThe reaction mixture was then cooled to ambient temperature
  2. customnitrogen gas was bubbled through the solution vigorously for 20 min
  3. additionPalladium (10 wt. % (dry basis) on activated carbon) (20 g) was then added
  4. temperatureThe reaction mixture was heated at 40° C. for 12 h
  5. filtrationfiltered through a pad of Celite
  6. customThe solvent was then removed under reduced pressure and 1M hydrochloric acid (40 mL)
  7. additionwas added to the crude residue
  8. additionSodium hydroxide (10N) was then added
  9. extractionThe aqueous layer was extracted with ethyl acetate (2×150 mL)
  10. dry with materialdried (magnesium sulfate)
  11. customthe solvent was removed under reduced pressure

출처 및 근거

ORD 기록
ord-a6451338d62041c38525c9d058db64c0
출처 데이터셋
uspto-grants-2006_11
DOI
10.6084/m9.figshare.5104873.v1
특허 번호
US07141671B2

반응 노트

이 페이지에서참가 물질반응 조건실험 절차후처리출처 및 근거반응 노트