홈MCP워크벤치Skills
홈워크벤치알림마이페이지
llms.txt · MCP 가이드개인정보처리방침 · 이용약관 · 지원v1.8.3
  1. 홈
  2. /반응

Sodium Hydroxide → Pf-06282999

HRID 77530
인쇄

반응식

HRID 77530 반응식
[NH2:1][C:2](=[O:21])[CH2:3][NH:4]/[C:5](/[C:12]1[CH:17]=[C:16]([Cl:18])[CH:15]=[CH:14][C:13]=1[O:19][CH3:20])=[CH:6]\[C:7]([O:9]CC)=O.C(OCCCC)(=O)C.C[Si]([N:34]=[C:35]=[S:36])(C)C.[OH-].[Na+]>CO.O>[Cl:18][C:16]1[CH:15]=[CH:14][C:13]([O:19][CH3:20])=[C:12]([C:5]2[N:4]([CH2:3][C:2]([NH2:1])=[O:21])[C:35](=[S:36])[NH:34][C:7](=[O:9])[CH:6]=2)[CH:17]=1
참가 물질반응 조건실험 절차후처리출처 및 근거반응 노트

참가 물질

6

반응물 4

HCID 14798Sodium Hydroxide2회HCID 31272Butyl AcetateHCID 75297IsothiocyanatotrimethylsilaneHCID 86684671(Z)-Ethyl 3-((2-amino-2-oxoethyl)amino)-3-(5-chloro-2-methoxyphenyl)acrylate

생성물 1

HCID 71571306Pf-06282999수율 53.2%

시약·촉매·용매 1

HCID 22242641
Methanol--water (1/1)
용매

반응 조건

온도
30 °C

실험 절차

A reaction vessel equipped with an efficient stirrer was charged with (Z)-ethyl 3-((2-amino-2-oxoethyl)amino)-3-(5-chloro-2-methoxyphenyl)acrylate (15 g, 50.2 mmol), butyl acetate (150 mL) and trimethylsilyl isothiocyanate (160.7 mmole, 21.1 g, 22.7 mL) and the mixture was heated to reflux. After 15 hours, the mixture was cooled to 30° C. and treated with 1 N aqueous sodium hydroxide (112.5 mL, 112.5 mmoles). After 30 min, the organic layer was separated and extracted with another portion of 1 N sodium hydroxide (37.5 mL, 37.5 mmoles). The combined aqueous phases were extracted twice with dichloromethane (2×45 mL), filtered, and treated with 6N HCl until a pH of 2.5 was achieved. After stirring for 1 hour, the resulting solid was isolated by vacuum filtration, resuspended in 100 mL of a 1:1 methanol-water solution, heated with stirring at 50° C. for 2 hours, and cooled to room temperature before collecting the solid by vacuum filtration, pulling dry and drying in a vacuum oven (20 mm Hg, 50° C.) for 12 hours to afford 8.7 g of the desired product as a tan solid.

후처리

  1. customA reaction vessel equipped with an efficient stirrer
  2. temperaturethe mixture was heated to reflux
  3. waitAfter 30 min
  4. customthe organic layer was separated
  5. extractionThe combined aqueous phases were extracted twice with dichloromethane (2×45 mL)
  6. filtrationfiltered
  7. additiontreated with 6N HCl until a pH of 2.5
  8. customthe resulting solid was isolated by vacuum filtration
  9. temperatureheated
  10. stirringwith stirring at 50° C. for 2 hours
  11. temperaturecooled to room temperature
  12. custombefore collecting the solid
  13. filtrationby vacuum filtration
  14. custompulling dry
  15. customdrying in a vacuum oven (20 mm Hg, 50° C.) for 12 hours

출처 및 근거

ORD 기록
ord-63686256c4a649f98865c80f9bb71e41
출처 데이터셋
uspto-grants-2014_09
DOI
10.6084/m9.figshare.5104873.v1
특허 번호
US08841314B2

반응 노트

이 페이지에서참가 물질반응 조건실험 절차후처리출처 및 근거반응 노트