홈MCP워크벤치Skills
홈워크벤치알림마이페이지
llms.txt · MCP 가이드개인정보처리방침 · 이용약관 · 지원v1.8.3
  1. 홈
  2. /반응

3-Bromobenzonitrile → 5-(3-bromophenyl)-1H-1,2,3,4-tetrazole

HRID 852317
인쇄

반응식

HRID 852317 반응식
[Br:1][C:2]1[CH:3]=[C:4]([CH:7]=[CH:8][CH:9]=1)[C:5]#[N:6].[N:10]([Si](C)(C)C)=[N+:11]=[N-:12].C([Sn](=O)CCCC)CCC>C1(C)C=CC=CC=1.CCOC(C)=O>[Br:1][C:2]1[CH:3]=[C:4]([C:5]2[N:10]=[N:11][NH:12][N:6]=2)[CH:7]=[CH:8][CH:9]=1
참가 물질반응 조건실험 절차후처리출처 및 근거반응 노트

참가 물질

6

반응물 3

HCID 233813-BromobenzonitrileHCID 61221Dibutyltin oxideHCID 78378Azidotrimethylsilane

생성물 1

HCID 40730565-(3-bromophenyl)-1H-1,2,3,4-tetrazole

시약·촉매·용매 2

HCID 1140Toluene용매HCID 8857Ethyl Acetate용매

반응 조건

온도
110 °C

실험 절차

3-Bromobenzonitrile (2.49 g, 13.7 mmol) and azidotrimethylsilane (3.14 g, 27.3 mmol) were stirred in anhydrous toluene (100 mL) under argon at ambient temperature. To this was added dibutyltin oxide (341 mg, 1.37 mmol) and the resulting reaction was fitted with a reflux condenser and heated with stirring at 110° C. for 3 h. Upon cooling, the reaction mixture was concentrated in vacuo, and then concentrated to dryness twice following the addition of MeOH (ca. 25 mL each). The crude reaction mixture was dissolved in EtOAc (300 mL) and washed with H2O (2×100 mL). The organic phase was washed with 1N aqueous NaOH (4×75 mL), the combined basic aqueous portions were treated with 4N HCl to obtain an endpoint of pH=4 and the acidic aqueous phase was extracted with EtOAc (4×100 mL washes). The combined EtOAc layers were dried (MgSO4), filtered, and concentrated in vacuo to obtain 5-(3-bromophenyl)-2H-tetrazole as a white solid.

후처리

  1. customthe resulting reaction
  2. customwas fitted with a reflux condenser
  3. temperatureheated
  4. temperatureUpon cooling
  5. concentrationthe reaction mixture was concentrated in vacuo
  6. concentrationconcentrated to dryness
  7. additionthe addition of MeOH (ca. 25 mL each)
  8. customThe crude reaction mixture
  9. washwashed with H2O (2×100 mL)
  10. washThe organic phase was washed with 1N aqueous NaOH (4×75 mL)
  11. additionthe combined basic aqueous portions were treated with 4N HCl
  12. customto obtain an endpoint of pH=4
  13. extractionthe acidic aqueous phase was extracted with EtOAc (4×100 mL washes)
  14. dry with materialThe combined EtOAc layers were dried (MgSO4)
  15. filtrationfiltered
  16. concentrationconcentrated in vacuo

출처 및 근거

ORD 기록
ord-abd3e5c9b2124f1ca90309d08435e594
출처 데이터셋
uspto-grants-2007_08
DOI
10.6084/m9.figshare.5104873.v1
특허 번호
US07253190B2

반응 노트

이 페이지에서참가 물질반응 조건실험 절차후처리출처 및 근거반응 노트