홈MCP워크벤치Skills
홈워크벤치알림마이페이지
llms.txt · MCP 가이드개인정보처리방침 · 이용약관 · 지원v1.8.0
  1. 홈
  2. /반응

Methanol → 3-Ethynyl-1-azabicyclo[2.2.2]octan-3-ol

HRID 861423
노트
인쇄 미리보기

반응식

HRID 861423 반응식
[C:1]([C:3]1([O:11]C(=O)CCC)[CH:8]2[CH2:9][CH2:10][N:5]([CH2:6][CH2:7]2)[CH2:4]1)#[CH:2].CO.[OH-].[Na+]>O.S([O-])([O-])(=O)=O.[NH4+].[NH4+]>[C:1]([C:3]1([OH:11])[CH:8]2[CH2:9][CH2:10][N:5]([CH2:6][CH2:7]2)[CH2:4]1)#[CH:2]
참가 물질실험 절차후처리출처 및 근거반응 노트

참가 물질

6

반응물 3

HCID 887MethanolHCID 14798Sodium Hydroxide2회HCID 54501015HCID 54501015, 화합물

생성물 1

HCID 36135173-Ethynyl-1-azabicyclo[2.2.2]octan-3-ol수율 18.3%

시약·촉매·용매 2

HCID 962Water용매2회HCID 6097028Ammonium Sulfate
용매

실험 절차

A solution of (±)-3-ethynyl-3-butyryloxyquinuclidine (4.42 g) in deionised water (700 ml) containing methanol (35 ml) was adjusted to pH 7.0 using an 0.1M aqueous sodium hydroxide solution (dispensed by a pH autotitrater). A suspension of pig liver eaterase (8.0 ml, 9200 units, in 3.2M aqueous ammonium sulphate solution at pH8; Sigma Chemical Company Ltd) was added to the reaction mixture and the mixture was stirred at ambient temperature whilst maintaining the pH at 7.0 using 0.1M aqueous sodium hydroxide solution (dispensed by a pH autotitrater). After 5.5 hours, 7.3 ml of the sodium hydroxide solution had been consumed, indicating that the hydrolysis was 35% complete. The pH of the reaction mixture was adjusted to 2.5 using 2M aqueous hydrochloric acid and the mixture was stirred for 10 minutes. 2M aqueous sodium hydroxide solution was then added to the mixture to give a pH of 7.05 and the mixture extracted with diethyl ether (3×200 ml, followed by 12×150 ml). The aqueous phase was separated, and freeze dried over a period of 48 hours to give a solid which was dissolved in deionised water (30 ml). The solution was filtered and the filtrate was basified to pH9 using 10.8M sodium hydroxide solution to give a solid. The solid was collected by filtration to give (+)-3-ethynyl-3-hydroxyquinuclidine, (554 mg) m.p. 204°-207° C., [α]20D =54.5° (C=0.99, methanol).

후처리

  1. additionwas added to the reaction mixture
  2. custom7.3 ml of the sodium hydroxide solution had been consumed
  3. stirringthe mixture was stirred for 10 minutes
  4. addition2M aqueous sodium hydroxide solution was then added to the mixture
  5. customto give a pH of 7.05
  6. extractionthe mixture extracted with diethyl ether (3×200 ml, followed by 12×150 ml)
  7. customThe aqueous phase was separated
  8. customfreeze dried over a period of 48 hours
  9. customto give a solid which
  10. filtrationThe solution was filtered
  11. customto give a solid
  12. filtrationThe solid was collected by filtration

출처 및 근거

ORD 기록
ord-20987203ff004432aebbfc2361ca824d
출처 데이터셋
uspto-grants-1998_02
DOI
10.6084/m9.figshare.5104873.v1
특허 번호
US05714496

반응 노트

불러오는 중…

이 페이지에서참가 물질실험 절차후처리출처 및 근거반응 노트