홈MCP워크벤치Skills
홈워크벤치알림마이페이지
llms.txt · MCP 가이드개인정보처리방침 · 이용약관 · 지원v1.8.3
  1. 홈
  2. /반응

Malononitrile → 2-[Hydroxy(4-nitrophenyl)methylene]malononitrile

HRID 870987
인쇄

반응식

HRID 870987 반응식
[N+:1]([C:4]1[CH:12]=[CH:11][C:7]([C:8](Cl)=[O:9])=[CH:6][CH:5]=1)([O-:3])=[O:2].[C:13](#[N:17])[CH2:14][C:15]#[N:16].C1COCC1.CCN(C(C)C)C(C)C>C1(C)C=CC=CC=1>[OH:9][C:8]([C:7]1[CH:11]=[CH:12][C:4]([N+:1]([O-:3])=[O:2])=[CH:5][CH:6]=1)=[C:14]([C:13]#[N:17])[C:15]#[N:16]
참가 물질실험 절차후처리출처 및 근거반응 노트

참가 물질

6

반응물 4

HCID 8010MalononitrileHCID 8028TetrahydrofuranHCID 85024-Nitrobenzoyl chlorideHCID 81531Diisopropylethylamine2회

생성물 1

HCID 858427932-[Hydroxy(4-nitrophenyl)methylene]malononitrile

시약·촉매·용매 1

HCID 1140Toluene용매2회

실험 절차

4-Nitrobenzoyl chloride (93 g, 0.50 mol) and malononitrile (33 g, 0.50 mol) were dissolved in toluene (400 mL) and THF (70 mL) in a flask equipped with an addition funnel, a thermometer, a stir bar, and argon atmosphere. The flask was immersed in a −30° C. bath. When the internal temperature reached −10° C., DIPEA (129 g, 1.0 mol) in 300 mL of toluene was added dropwise over 40 min. After an additional 1 hr, the bath was removed. After ca. 14 hr, the mixture had 2 layers. The bottom layer was concentrated in vacuo, dissolved in 400 mL of EtOAc, washed with 10% aqueous citric acid (2×250 mL), dried over Na2SO4, and concentrated in vacuo. The residue was mostly dissolved in THF (100 mL) and left 30 min in a freezer. The resulting solid was collected with the aid of additional freezer-cold THF and pressed well with rubber dam. The isolated solid (60 g) was suspended in 1 M H2SO4, collected, pressed, and washed with water. After drying, the solid weighed 36 g. This solid was dissolved in EtOAc (400 mL), washed with 1 M H2SO4 (200 mL) and water (200 mL), filtered through phase separation paper, and concentrated. The solid residue was reconcentrated successively from dichloromethane and toluene and dried at high vacuum. At this stage, 25 g were isolated. The HPLC purity was 94%. Analysis of a 60 MHz NMR spectrum showed about 18 mol % DIPEA. The material was used in the next step without further purification. Another 15 g portion of solid of 95% HPLC purity but containing 30 mol % DIPEA was eventually isolated from the THF filtrate. This material was set aside. The estimated overall yield of the reaction was about 42% NMR (60 MHz) (CDCl3) δ 8.0 (AB, 4H)

후처리

  1. customwas immersed in a −30° C.
  2. customreached −10° C.
  3. customthe bath was removed
  4. waitAfter ca. 14 hr
  5. concentrationThe bottom layer was concentrated in vacuo
  6. dissolutiondissolved in 400 mL of EtOAc
  7. washwashed with 10% aqueous citric acid (2×250 mL)
  8. dry with materialdried over Na2SO4
  9. concentrationconcentrated in vacuo
  10. dissolutionThe residue was mostly dissolved in THF (100 mL)
  11. waitleft 30 min in a freezer
  12. customThe resulting solid was collected with the aid of additional freezer-cold THF
  13. customcollected
  14. washwashed with water
  15. customAfter drying
  16. dissolutionThis solid was dissolved in EtOAc (400 mL)
  17. washwashed with 1 M H2SO4 (200 mL) and water (200 mL)
  18. filtrationfiltered through phase separation paper
  19. concentrationconcentrated
  20. customdried at high vacuum
  21. customAt this stage, 25 g were isolated
  22. customThe material was used in the next step without further purification
  23. additionAnother 15 g portion of solid of 95% HPLC purity but containing 30 mol % DIPEA
  24. customwas eventually isolated from the THF filtrate

출처 및 근거

ORD 기록
ord-bf7170ca908a4f37bfd32c70ffc9896d
출처 데이터셋
uspto-grants-2015_03
DOI
10.6084/m9.figshare.5104873.v1
특허 번호
US08969583B2

반응 노트

이 페이지에서참가 물질실험 절차후처리출처 및 근거반응 노트