홈MCP워크벤치Skills
홈워크벤치알림마이페이지
llms.txt · MCP 가이드개인정보처리방침 · 이용약관 · 지원v1.8.0
  1. 홈
  2. /반응

Methyl L-lysinate dihydrochloride → L-Lysine

HRID 8856
노트
인쇄 미리보기

반응식

HRID 8856 반응식
Cl.Cl.C[O:4][C:5](=[O:13])[C@H:6]([CH2:8][CH2:9][CH2:10][CH2:11][NH2:12])[NH2:7]>O.[OH-].[Na+]>[NH2:7][C@H:6]([C:5]([OH:13])=[O:4])[CH2:8][CH2:9][CH2:10][CH2:11][NH2:12]
참가 물질반응 조건실험 절차후처리출처 및 근거반응 노트

참가 물질

4

반응물 1

HCID 117778Methyl L-lysinate dihydrochloride

생성물 1

HCID 5962L-Lysine

시약·촉매·용매 2

HCID 962Water용매HCID 14798Sodium Hydroxide용매

반응 조건

온도
110 °C

실험 절차

2.33 Grams (10 mmol) of L-lysine methyl ester dihydrochloride was dissolved in 5.0 ml of water to prepare a treating agent solution. A cotton cloth (150 mm×170 mm, 4.8 g) was in advance treated to be immersed in 25% aqueous sodium hydroxide solution for an hour at room temperature, washed with water and dried. This treated cotton cloth was allowed to uniformly absorb the total amount of the above treating agent solution and then air-dried for 3 hours at room temperature. The dried cloth was heat-treated for 20 minutes at 140° C. in a batch type hot air oven (“IPHH-2000”, an inert oven manufactured by Tabaiesbeck Co., Ltd.) and washed with water. It was further washed with 5% aqueous sodium bicarbonate solution and rinsed three times with water and subsequently was washed with 10% aqueous citric acid solution and rinsed three times with water, and finally washed with household washing detergent solution, rinsed with water and air-dried. The identification of L-lysine cellulose ester was conducted by the following method. A part of the cloth was cut and a solution of ninhydrin in butanol was sprayed on it. Thereafter, it was heated for 10 minutes in an oven of 110° C. to cause coloring thereby the presence of the amino acid was confirmed. Also, a part of the cloth was cut and subjected to an infrared spectroscopic analysis whereby there was confirmed a peak based on ester bond at 1720–1740 cm1. As a result of determination for the amount of the L-lysine bonded, it was 0.10 mmol based on 1 g of the cloth. The degree of esterfication was 0.016.

후처리

  1. customto prepare a treating agent solution
  2. additiontreated
  3. washwashed with water
  4. customdried
  5. customto uniformly absorb the total amount of the above treating agent solution
  6. customair-dried for 3 hours at room temperature
  7. additionThe dried cloth was heat-treated for 20 minutes at 140° C. in a batch type hot air oven (“IPHH-2000”, an inert oven manufactured by Tabaiesbeck Co., Ltd.)
  8. washwashed with water
  9. washIt was further washed with 5% aqueous sodium bicarbonate solution
  10. washrinsed three times with water
  11. washsubsequently was washed with 10% aqueous citric acid solution
  12. washrinsed three times with water
  13. washfinally washed with household
  14. washwashing detergent solution
  15. washrinsed with water
  16. customair-dried

출처 및 근거

ORD 기록
ord-e1ae6626684141c2bc4822f377cdc2d6
출처 데이터셋
uspto-grants-2006_08
DOI
10.6084/m9.figshare.5104873.v1
특허 번호
US07091221B2

반응 노트

불러오는 중…

이 페이지에서참가 물질반응 조건실험 절차후처리출처 및 근거반응 노트