홈MCP워크벤치Skills
홈워크벤치알림마이페이지
llms.txt · MCP 가이드개인정보처리방침 · 이용약관 · 지원v1.8.3
  1. 홈
  2. /반응

Benzyl Alcohol → 1-(3-(Benzyloxy)-2-fluoro-6-nitrophenyl)propan-2-one

HRID 914778
인쇄

반응식

HRID 914778 반응식
[F:1][C:2]1[C:7](F)=[CH:6][CH:5]=[C:4]([N+:9]([O-:11])=[O:10])[C:3]=1[CH2:12][C:13](=[O:15])[CH3:14].[CH2:16]([OH:23])[C:17]1[CH:22]=[CH:21][CH:20]=[CH:19][CH:18]=1.O[Li].O.Cl>ClCCl>[CH2:16]([O:23][C:7]1[C:2]([F:1])=[C:3]([CH2:12][C:13](=[O:15])[CH3:14])[C:4]([N+:9]([O-:11])=[O:10])=[CH:5][CH:6]=1)[C:17]1[CH:22]=[CH:21][CH:20]=[CH:19][CH:18]=1
참가 물질반응 조건실험 절차후처리출처 및 근거반응 노트

참가 물질

6

반응물 4

HCID 244Benzyl AlcoholHCID 313Hydrochloric AcidHCID 168937Lithium hydroxide, monohydrateHCID 142688761-(2,3-Difluoro-6-nitrophenyl)propan-2-one

생성물 1

HCID 112896631-(3-(Benzyloxy)-2-fluoro-6-nitrophenyl)propan-2-one

시약·촉매·용매 1

HCID 6344Dichloromethane
용매

반응 조건

온도
105 °C

실험 절차

To a solution of 1-(2,3-difluoro-6-nitrophenyl)-propan-2-one (2.5 g, 82% purity by HPLC analysis, 9.54 mmol) were added benzyl alcohol (2.5 mL) and LiOH•H2O (1.07 g, 25.58 mmol). The reaction mixture was then heated to 100-110° C. and stirred for 4 hours until HPLC analysis indicated complete reaction. After cooling to RT, the reaction mixture was diluted with dichloromethane (18 mL) and neutralized to pH 6-7 with 1 N HCl. The layers were separated and the organic phase was washed with brine and collected. With stirring, heptane (30-25 mL) was added to the organic solution whereupon crystallization was initiated. The resulting slurry was cooled to 0-5° C. and stirred for an additional 1 h. The slurry was then filtered and the filter cake was washed with heptane. The yellow-brown solids were then dried in vacuo at 50° C. for 12-15 h to afford 1.6 g of the desired compound which was 95% pure by HPLC analysis. HPLC method: Column: YMC Pack Cyano 3 um 4.6×50 mm Solvent A: 0.05% TFA in MeOH:Water (20:80), Solvent B: 0.05% TFA in MeOH: water (20:80), Wavelength: 254 nm Flow Rate: 3 mL/min. Gradient Time: 3 min. Final % B: 100 Initial Hold: 0.5 min. Start % B: 0. Typical Retention Times: SM, 1.2 min; Product 2.2-2.3 min.

후처리

  1. customreaction
  2. temperatureAfter cooling to RT
  3. customThe layers were separated
  4. washthe organic phase was washed with brine
  5. customcollected
  6. stirringWith stirring
  7. additionheptane (30-25 mL) was added to the organic solution whereupon crystallization
  8. temperatureThe resulting slurry was cooled to 0-5° C.
  9. stirringstirred for an additional 1 h
  10. filtrationThe slurry was then filtered
  11. washthe filter cake was washed with heptane
  12. customThe yellow-brown solids were then dried in vacuo at 50° C. for 12-15 h

출처 및 근거

ORD 기록
ord-82c5911e23ed4f4ca8d0f3d73397f31b
출처 데이터셋
uspto-grants-2007_09
DOI
10.6084/m9.figshare.5104873.v1
특허 번호
US07265113B2

반응 노트

이 페이지에서참가 물질반응 조건실험 절차후처리출처 및 근거반응 노트