홈MCP워크벤치Skills
홈워크벤치알림마이페이지
llms.txt · MCP 가이드개인정보처리방침 · 이용약관 · 지원v1.8.0
  1. 홈
  2. /반응

Hydrochloric Acid → 3-Hydroxymethyl-2,3'-bipyridyl

HRID 969739
노트
인쇄 미리보기

반응식

HRID 969739 반응식
[N:1]1[CH:6]=[CH:5][CH:4]=[C:3]([C:7](O)=[O:8])[C:2]=1[C:10]1[CH:11]=[N:12][CH:13]=[CH:14][CH:15]=1.C(N(CC)CC)C.[BH4-].[Na+].CO.Cl>O1CCCC1>[OH:8][CH2:7][C:3]1[C:2]([C:10]2[CH:11]=[N:12][CH:13]=[CH:14][CH:15]=2)=[N:1][CH:6]=[CH:5][CH:4]=1
참가 물질반응 조건실험 절차후처리출처 및 근거반응 노트

참가 물질

7

반응물 5

HCID 313Hydrochloric AcidHCID 887MethanolHCID 8471TriethylamineHCID 4311764Sodium borohydrideHCID 23423222HCID 23423222, 화합물

생성물 1

HCID 160370823-Hydroxymethyl-2,3'-bipyridyl수율 84.4%

시약·촉매·용매 1

HCID 8028
Tetrahydrofuran
용매

반응 조건

온도
20 °C

실험 절차

To a continually stirred, ice-cold solution of 2,3′-bipyridine-3-carboxylic acid (0.28 g, 1.40 mmole) in dry tetrahydrofuran (10 ml) and triethylamine (0.20 ml, 1.43 mmole) ethyl chloroformate (0.14 ml, 1.46 mmole) was added drop-by-drop over a 30 minute period. The precipitated product was then filtered and washed several times with tetrahyrofuran (3×2 ml). The THF phases were combined, cooled to +10° C., and while stirring under an argon atmosphere, sodium borohydride (0.185 g, 4.9 mmole) was added and then methanol (0.90 ml, 22.2 mmole) was added drop-by-drop over a 1 hour period during which time the temperature increased to 20° C. (Soai et al., 1987). The material was stirred for an additional 1 hour at room temperature. Then, 1N hydrochloric acid was carefully added, the solvent was evaporated under vacuum to 5 ml and washed with dichloromethane (3×5 ml). Sodium carbonate (0.85 g) was added to the aqueous phase, which was then extracted with dichloromethane. The combined fractions were dried with magnesium sulfate and evaporated under vacuum (2 Hg mm, 45° C.) giving a pure product (0.22 g, 84%). 1H-NMR, δ, ppm, 8.71 (1H, dd, J=2.1, 0.6 Hz, C2′-H), 8.55 (1H, dd, J==4.8, 1.5 Hz, C6-H), 8.52 (1H, dd, J=4.8, 1.8 Hz, C6′-H), 7.95 (1H, dd, J=7.8, 1.5 Hz, C4-H), 7.91 (1H, ddd, J=7.8, 2.1, 1.8 Hz, C4′-H), 7.35 (1H, ddd, J=7.8, 4.8, 0.6 Hz, C5′-H), 7.31 (1H, dd, J=7.8, 4.8 Hz, C5-H), 4.58 (2H, s, CH2-O).

후처리

  1. filtrationThe precipitated product was then filtered
  2. washwashed several times with tetrahyrofuran (3×2 ml)
  3. temperaturecooled to +10° C.
  4. stirringwhile stirring under an argon atmosphere
  5. stirringThe material was stirred for an additional 1 hour at room temperature
  6. customthe solvent was evaporated under vacuum to 5 ml
  7. washwashed with dichloromethane (3×5 ml)
  8. additionSodium carbonate (0.85 g) was added to the aqueous phase, which
  9. extractionwas then extracted with dichloromethane
  10. dry with materialThe combined fractions were dried with magnesium sulfate
  11. customevaporated under vacuum (2 Hg mm, 45° C.)

출처 및 근거

ORD 기록
ord-8899560f29a0445c9127db4d09783294
출처 데이터셋
uspto-grants-2007_12
DOI
10.6084/m9.figshare.5104873.v1
특허 번호
US07307171B2

반응 노트

불러오는 중…

이 페이지에서참가 물질반응 조건실험 절차후처리출처 및 근거반응 노트