Potassium Hydroxide → Phosphoric acid, monooctadecyl ester, zinc salt (1:1)

HRID 972048

반응식

HRID 972048 반응식
[P:1]([O-:23])([O-:22])([O:3][CH2:4][CH2:5][CH2:6][CH2:7][CH2:8][CH2:9][CH2:10][CH2:11][CH2:12][CH2:13][CH2:14][CH2:15][CH2:16][CH2:17][CH2:18][CH2:19][CH2:20][CH3:21])=[O:2].[OH-].[K+].S([O-])([O-])(=O)=O.[Zn+2:31]>O>[P:1]([O-:22])([O-:23])([O:3][CH2:4][CH2:5][CH2:6][CH2:7][CH2:8][CH2:9][CH2:10][CH2:11][CH2:12][CH2:13][CH2:14][CH2:15][CH2:16][CH2:17][CH2:18][CH2:19][CH2:20][CH3:21])=[O:2].[Zn+2:31]

참가 물질

5

반응물 3

HCID 14797Potassium HydroxideHCID 24424Zinc SulfateHCID 21881707CID 218817072회

생성물 1

HCID 165255Phosphoric acid, monooctadecyl ester, zinc salt (1:1)

시약·촉매·용매 1

HCID 962Water용매

반응 조건

온도
90 °C

실험 절차

Water (88 L) was added to stearyl phosphate (molar ratio of diester/monoester=1/2.7; acid value, 232 mg KOH/g) (5 kg) while heating at 90° C., whereby the stearyl phosphate was dispersed uniformly. An aqueous solution of potassium hydroxide (300 g/L) (3862 ml) was dropwise added to the mixture while keeping the said temperature. When the addition was finished, the mixture showed a pH of about 11. The saponified dispersion was divided in five equal parts, and an aqueous solution of zinc sulfate (300 g/L) (1591 ml) was added to each part at 50°, 60°, 70°, 80° or 90° C. and the mixture was further stirred for 90 minutes. The product was collected, washed with water, filtered, dried at 75° C. for 72 hours and pulverized by the aid of a water-cooling type hammer mill to give zinc stearyl phosphate. The results are shown in Table 1.

후처리

  1. additionWhen the addition
  2. customThe product was collected
  3. washwashed with water
  4. filtrationfiltered
  5. customdried at 75° C. for 72 hours
  6. temperaturecooling type hammer mill

출처 및 근거

ORD 기록
ord-72ccf124566541a194fd5a0814ec8dcb
출처 데이터셋
uspto-grants-1979_07
특허 번호
US04163018

연결된 노트

불러오는 중…