Indene → 1H-Indene, 3-(3-bromopropyl)-

HRID 972723노트

반응식

HRID 972723 반응식
[CH2:1]1[C:9]2[C:4](=[CH:5][CH:6]=[CH:7][CH:8]=2)[CH:3]=[CH:2]1.[Br:10][CH2:11][CH2:12][CH2:13]Br>[OH-].[Na+]>[Br:10][CH2:11][CH2:12][CH2:13][C:1]1[C:9]2[C:4](=[CH:5][CH:6]=[CH:7][CH:8]=2)[CH2:3][CH:2]=1

참가 물질

4

반응물 2

HCID 7219IndeneHCID 80011,3-Dibromopropane

생성물 1

HCID 105378211H-Indene, 3-(3-bromopropyl)-

시약·촉매·용매 1

HCID 14798Sodium Hydroxide용매

실험 절차

The compound is prepared as described by Makoska in Tetrahedron Letters 38, 4261-4624 (1966) by adding a mixture of 580 g (5M) indene and 1010 g (5M) 1,3-dibromopropane to 1500 ml 50% aqueous NaOH containing 50 ml 40% methanolic Triton B. The temperature is held below 55° C by cooling in an ice bath. After stirring 6 hours the reaction mixture is diluted to 4 l. The layers are separated and the aqueous layer is extracted two times with ether. The combined organic layers are extracted two times with water, dried over MgSO4, filtered and the solvent is removed. The oily product is distilled and redistilled at reduced pressure collecting 432 g (36.6%) boiling 126°-140°/0.1 mm.

후처리

  1. customThe compound is prepared
  2. additionby adding
  3. customis held below 55° C
  4. temperatureby cooling in an ice bath
  5. additionis diluted to 4 l
  6. customThe layers are separated
  7. extractionthe aqueous layer is extracted two times with ether
  8. extractionThe combined organic layers are extracted two times with water
  9. dry with materialdried over MgSO4
  10. filtrationfiltered
  11. customthe solvent is removed
  12. distillationThe oily product is distilled
  13. distillationredistilled at reduced pressure
  14. customcollecting 432 g (36.6%)
  15. customboiling 126°-140°

출처 및 근거

ORD 기록
ord-839f7d22d54c47fdaa8fa154826dc63e
출처 데이터셋
uspto-grants-1977_10
특허 번호
US04053596

반응 노트

불러오는 중…