HRID1761143

反应详情

EQUATION

反应方程式

HRID 1761143 的结构方程式

AUXILIARIES

试剂、催化剂与溶剂

2

CONDITIONS

反应条件

温度
-4 °C

PROCEDURE

实验过程

Dimethylformamide (11.7 g) and 240 mL of dichloromethane in a 1 L, 3-neck round bottom flask equipped with magnetic stirring, a reflux condenser, and a dropping funnel, was cooled to −4° C. in an ice-salt bath maintained at −10° C. Phosphorus oxychloride (24.5 g) was rapidly added via the dropping funnel. The temperature increased to −3° C., and then, with further stirring, decreased to −7° C. Crude 3-(2-carboxyethyl)-4,5,6,7-tetrahydroindole dissolved in 160 mL of dichloromethane was added via the dropping funnel over 15 min keeping the temperature below 1° C. The mixture was refluxed for 10 min, cooled to 5° C., and diluted with 300 mL of water. The aqueous layer was evaporated and was saved, and the organic layer was extracted with another 30 mL of water. The aqueous layers were combined, were washed with 30 mL of dichloromethane and were cooled to 5° C. The aqueous layer was adjusted to pH 10 with about 48 mL of 10 N sodium hydroxide, accompanied by a temperature increase to 15° C. The mixture was then cooled to 10° C. and adjusted to pH 2-3 with about 48 ml of 10 N hydrochloric acid. The oil which formed solidified, and was collected by vacuum filtration, was washed three times with 20 mL of water each time, and was dried under high vacuum to give 5.5 g (31% yield) of 3-(2-carboxyethyl)-2-formyl-4,5,6,7-tetrahydroindole as a brown solid.

WORKUP

后处理

  1. temperaturemaintained at −10° C
  2. temperatureThe temperature increased to −3° C.
  3. customdecreased to −7° C
  4. additionwas added via the dropping funnel over 15 min
  5. customthe temperature below 1° C
  6. temperatureThe mixture was refluxed for 10 min
  7. temperaturecooled to 5° C.
  8. customThe aqueous layer was evaporated
  9. extractionthe organic layer was extracted with another 30 mL of water
  10. washwere washed with 30 mL of dichloromethane
  11. temperaturewere cooled to 5° C
  12. temperatureincrease to 15° C
  13. temperatureThe mixture was then cooled to 10° C.
  14. customThe oil which formed
  15. filtrationwas collected by vacuum filtration
  16. washwas washed three times with 20 mL of water each time
  17. customwas dried under high vacuum