反应详情

To a dry 3 liter, 3-necked, round bottom flask equipped with a mechanical paddle stirrer, a nitrogen gas flow, and a condenser was added 87 gm (83.5 ml; 0.82 moles) of benzaldehyde and 63 gm (90.5 ml; 0.86 moles) of t-butylamine. The mixture was stirred for about 4 hours at room temperature to allow complete formation of N-benzylidene-t-butylamine. After removal of the nitrogen gas flow and the condenser, the reaction flask was evacuated under an aspirator (about 24″ Hg vacuum) for about 15 minutes. The aspirator was detached and 288 gm (3.428 moles) of sodium bicarbonate followed by 500 ml of water and 500 ml of acetone were added to the 3-liter flask. The condenser was reattached to the flask and carefully about 600 gm (0.98 moles) of Oxone® was added portion-wise through a powder-addition funnel to the stirring reaction over a period of about 10 minutes. The reaction began to slowly foam from the evolution of carbon dioxide and turn to a bluish tinge as the temperature rose to about 35° C. The reaction was stirred for one hour after the Oxone® addition, and a GC analysis revealed a trace amount of starting imine (3.72 minutes) and a large peak representing 2-t-butyl-3-phenyl oxaziridine (4.45 minutes). The reaction was poured into a beaker containing a 2-phase solution of 3000 ml water and 300 ml toluene. Insoluble salts were filtered out and the aqueous layer separated in a separatory funnel. The upper toluene layer was placed in a 1-liter single-neck, round bottom flask and concentrated over a 30-minute period on a rotary evaporator at 50° C. under vacuum (about 24″ Hg) to remove traces of acetone and water. Several silicon carbide boiling chips were added to the concentrated oxaziridine and the oxaziridine/toluene solution was refluxed at 115° C. -125° C. for 2-3 hours to form the desired N-t-butylphenylnitrone product. The excess toluene was removed under vacuum and the resulting clear brown liquid N-t-butylphenylnitrone was poured into a crystallizing dish and placed in a fume hood. Crystallization was almost immediate, affording 113.1 gm of crude crystalline N-t-butylphenylnitrone (78% theoretical yield).

1. customTo a dry 3 liter, 3-necked, round bottom flask equipped with a mechanical paddle stirrer
2. customAfter removal of the nitrogen gas flow
3. customthe condenser, the reaction flask was evacuated under an aspirator (about 24″ Hg vacuum) for about 15 minutes
4. additionwere added to the 3-liter flask
5. additionwas added portion-wise through a powder-addition funnel
6. customto the stirring reaction over a period of about 10 minutes
7. customrose to about 35° C
8. stirringThe reaction was stirred for one hour
9. additionThe reaction was poured into a beaker
10. filtrationInsoluble salts were filtered out
11. customthe aqueous layer separated in a separatory funnel
12. customThe upper toluene layer was placed in a 1-liter single-neck, round bottom flask
13. concentrationconcentrated over a 30-minute period on a rotary evaporator at 50° C. under vacuum (about 24″ Hg)
14. customto remove traces of acetone and water
15. additionSeveral silicon carbide boiling chips were added to the concentrated oxaziridine
16. temperaturethe oxaziridine/toluene solution was refluxed at 115° C. -125° C. for 2-3 hours