Hydrogen Peroxide → 1-Naphthol

A 0.5 mg/ml solution of a first compound (p-phenylenediamine, “A”) and a 0.5 mg/ml solution of a second compound (1-naphthol, “B”) was prepared by dissolving the compound in the appropriate amount of 0.1 M CH3COONa, pH 5.5, buffer. A total volume of 100 ml was used in each LOM beaker. 100 ml “A” was added to one beaker and 50 ml “A” and 50 ml “B” were combined to form 100 ml in a second beaker. Swatches of the material listed above were then wetted in DI water and soaked in the precursor solutions. A Coprinus cinereus peroxidase (CiP) with an activity of 180,000 POXU/ml was added to each beaker at a concentration of 0.05 POXU/ml. Either 200 or 500 μM hydrogen peroxide was added to each LOM beaker. The LOM beakers were sealed and mounted in the LOM. After 1 hour at 42 RPM and 30° C., the LOM was stopped. The spent liquor was poured off and the swatches were rinsed in cold tap water for about 15 minutes. The swatches were dried at room temperature and CIELAB values were measured for all of the swatches using the Macbeth ColorEye 7000. The results are given in Tables 51-54.

1. addition100 ml “A” was added to one beaker and 50 ml “A” and 50 ml “B”
2. customto form 100 ml in a second beaker
3. additionA Coprinus cinereus peroxidase (CiP) with an activity of 180,000 POXU/ml was added to each beaker at a concentration of 0.05 POXU/ml
4. customThe LOM beakers were sealed
5. additionThe spent liquor was poured off
6. washthe swatches were rinsed in cold tap water for about 15 minutes
7. customThe swatches were dried at room temperature

ORD record

ord-8beadaa7034845b8b432ecb56c0b5b80

Source dataset

uspto-grants-2001_10

DOI

10.6084/m9.figshare.5104873.v1

Patent number

US06296672B1