HRID52131

反应详情

EQUATION

反应方程式

HRID 52131 的结构方程式

AUXILIARIES

试剂、催化剂与溶剂

1

CONDITIONS

反应条件

温度
-100 °C

PROCEDURE

实验过程

378 ml of n-butyllithium (1.6M in hexane) are added to a solution of 88.2 g (0.624 mol) of 2,2,6,6-tetramethylpiperidine in 11 of THF at -20° C. under argon and the mixture is stirred at this temperature for 1 hour. The mixture is then cooled to -100° C., and a solution of 104.4 g (0.337 mol) of N,N-diethyl-3-(N',N'-diethylthiocarbamoyloxy)picolinamide in 300 ml of THF is added dropwise in such a way that the temperature does not exceed -90° C. After the mixture has been stirred at -95° C for 1 hour, it is again cooled to -102° C, and a solution of 119.3 g (0.605 mol) of tosyl azide in 200 ml of THF, cooled to -20° C., is added in the course of 30 seconds. After the mixture has been stirred at -80° C. for 15 minutes, 400 ml of a saturated NH4Cl solution are added, the mixture is heated to 0° C., and the aqueous phase is separated off and washed with 500 ml of diethyl ether and the organic phases are washed once with 200 ml of saturated NH4Cl solution and twice with in each case 150 ml of saturated NaCl solution, dried over Na2SO4 and concentrated in vacuo. The brown oil is taken up in 1.2 l of hexane under hot conditions, the mixture is slowly cooled to 0° C., with stirring, and the solid substance is filtered off and dried. Yield: 109.0 g of beige-brown crystals which are employed directly in the subsequent step.

WORKUP

后处理

  1. customdoes not exceed -90° C
  2. stirringAfter the mixture has been stirred at -95° C for 1 hour
  3. temperatureit is again cooled to -102° C
  4. additionis added in the course of 30 seconds
  5. stirringAfter the mixture has been stirred at -80° C. for 15 minutes
  6. temperaturethe mixture is heated to 0° C.
  7. customthe aqueous phase is separated off
  8. washwashed with 500 ml of diethyl ether
  9. washthe organic phases are washed once with 200 ml of saturated NH4Cl solution and twice with in each case 150 ml of saturated NaCl solution
  10. dry with materialdried over Na2SO4
  11. concentrationconcentrated in vacuo
  12. temperaturethe mixture is slowly cooled to 0° C.
  13. stirringwith stirring
  14. filtrationthe solid substance is filtered off
  15. customdried