StartseiteMCPWorkbenchSkills
StartseiteWorkbenchBenachrichtigungenMein Bereich
llms.txt · MCP-AnleitungDatenschutz · Nutzungsbedingungen · Supportv1.8.3
  1. Startseite
  2. /Reaktion

Ammonia → (S)-2-amino-1-((S)-2,5-dihydrofuran-2-yl)ethanol

HRID 1665863
Drucken

Reaktionsgleichung

Reaktionsgleichung von HRID 1665863
[O:1]1[CH2:5][CH:4]=[CH:3][C@H:2]1[C@@H:6]([OH:19])[CH2:7][NH:8]C(=O)OCC1C=CC=CC=1.[Cl-].[NH4+].S(I)(C1C=CC(C)=CC=1)(=O)=O.N.[OH-].[NH4+]>O.CC(O)C.O1CCCC1.[Zn]>[NH2:8][CH2:7][C@@H:6]([C@@H:2]1[CH:3]=[CH:4][CH2:5][O:1]1)[OH:19]
KomponentenReaktionsbedingungenVersuchsvorschriftAufarbeitungQuellen und NachweiseNotizen zur Reaktion

Komponenten

10

Edukt 5

HCID 222Ammonia2×HCID 14923Ammonium HydroxideHCID 25517Ammonium ChlorideHCID 11022347p-Toluenesulphonyl iodideHCID 59343386Benzyl (S)-2-((S)-2,5-dihydrofuran-2-yl)-2-hydroxyethylcarbamate

Produkt 1

HCID 55280978
(S)-2-amino-1-((S)-2,5-dihydrofuran-2-yl)ethanol

Reagenzien, Katalysatoren, Lösungsmittel 4

HCID 23994ZincKatalysator2×HCID 962WaterLösungsmittelHCID 3776IsopropanolLösungsmittel3×HCID 8028TetrahydrofuranLösungsmittel

Reaktionsbedingungen

Temperatur
75 °C

Versuchsvorschrift

Alternative Preparation of Benzyl (S)-2-((S)-2,5-dihydrofuran-2-yl)-2-hydroxyethylcarbamate (17); Zinc and ‘One-Pot’ Procedure. A solution of ammonium chloride (140 mg, 2.62 mmol) in water (1.5 mL) was added to a solution of iodotosylate (38) (800 g, 1.95 mmol) in propan-2-ol (3 mL) and tetrahydrofuran (6 mL) under argon. Zinc dust (140 mg, 2.15 mmol) was then added in portions over 5 minutes then the suspension stirred for 16 hours before filtering through celite in vacuo. The filter cake was washed with diethyl ether (15 mL). Hydrochloric acid (1M, 15 mL) was added to the filtrate then the organic phase separated. The aqueous layer was extracted with diethyl ether (15 mL) then the combined organic phase was washed with brine (15 mL), then dried (MgSO4), filtered and reduced in vacuo. The residue (0.54 g) was dissolved in ammonium hydroxide (4.5 mL) and a solution of ammonia in 2-propanol (3 mL, 2.0M, 6 mmol) then heated in a sealed tube at 75° C. for 16 hours. The solvents were removed in vacuo (transfer assisted with methanol) then the residue azeotroped with diethyl ether (5 mL) before adding ammonium hydroxide (4.5 mL) and ammonia in 2-propanol (3 mL, 2.0M, 6 mmol). The suspension was heated in a sealed tube at 75° C. for 16 hours. The solvents were removed in vacuo (transfer assisted with methanol) then the residue azeotroped with diethyl ether (3×5 mL) to obtain (S)-2-amino-1-((S)-2,5-dihydrofuran-2-yl)ethanol which was used without further purification.

Aufarbeitung

  1. filtrationbefore filtering through celite in vacuo
  2. washThe filter cake was washed with diethyl ether (15 mL)
  3. additionHydrochloric acid (1M, 15 mL) was added to the filtrate
  4. customthe organic phase separated
  5. extractionThe aqueous layer was extracted with diethyl ether (15 mL)
  6. washthe combined organic phase was washed with brine (15 mL)
  7. dry with materialdried (MgSO4)
  8. filtrationfiltered
  9. dissolutionThe residue (0.54 g) was dissolved in ammonium hydroxide (4.5 mL)
  10. customThe solvents were removed in vacuo (transfer assisted with methanol)
  11. customthe residue azeotroped with diethyl ether (5 mL)
  12. customThe solvents were removed in vacuo (transfer assisted with methanol)
  13. customthe residue azeotroped with diethyl ether (3×5 mL)

Quellen und Nachweise

ORD-Eintrag
ord-78149ac0a46542f485e8bf3d2e970f1a
Quelldatensatz
uspto-grants-2011_10
DOI
10.6084/m9.figshare.5104873.v1
Patentnummer
US08039641B2

Notizen zur Reaktion

Auf dieser SeiteKomponentenReaktionsbedingungenVersuchsvorschriftAufarbeitungQuellen und NachweiseNotizen zur Reaktion