StartseiteMCPWorkbenchSkills
StartseiteWorkbenchBenachrichtigungenMein Bereich
llms.txt · MCP-AnleitungDatenschutz · Nutzungsbedingungen · Supportv1.8.3
  1. Startseite
  2. /Reaktion

Water → 3-Methyl-3-(4-chlorophenyl)-1-trimethylstannyl-1-butene

HRID 1939692
Drucken

Reaktionsgleichung

Reaktionsgleichung von HRID 1939692
[CH3:1][C:2]([C:7]1[CH:12]=[CH:11][C:10]([Cl:13])=[CH:9][CH:8]=1)([CH3:6])[CH:3]=[CH:4]I.C([Li])CCC.[CH3:19][Sn:20](Cl)([CH3:22])[CH3:21].O>O1CCCC1>[CH3:1][C:2]([C:7]1[CH:12]=[CH:11][C:10]([Cl:13])=[CH:9][CH:8]=1)([CH3:6])[CH:3]=[CH:4][Sn:20]([CH3:22])([CH3:21])[CH3:19]
KomponentenReaktionsbedingungenVersuchsvorschriftAufarbeitungQuellen und NachweiseNotizen zur Reaktion

Komponenten

6

Edukt 4

HCID 962WaterHCID 14016Trimethyltin chlorideHCID 542638883-Methyl-3-(4-chlorophenyl)-1-iodo-1-buteneHCID 178418339Butyllithium

Produkt 1

HCID 676329003-Methyl-3-(4-chlorophenyl)-1-trimethylstannyl-1-buteneAusbeute 87,3 %

Reagenzien, Katalysatoren, Lösungsmittel 1

HCID 8028
Tetrahydrofuran
Lösungsmittel
2×

Reaktionsbedingungen

Temperatur
-90 °C

Versuchsvorschrift

A stirring solution of 4.8 grams (0.016 mole) of 3-methyl-3-(4-chlorophenyl)-1-iodo-1-butene in 50 mL of tetrahydrofuran is cooled to about -90° C., and 6.9 mL (0.018 mole) of n-butyllithium (2.5M in hexane) is added dropwise at a rate to maintain the reaction mixture temperature at about -85° to -90° C. Upon completion of the addition, the reaction mixture is stirred at -90° C. for 30 minutes. After this time, a solution of 3.7 grams (0.019 mole) of trimethyltin chloride in 10 mL of tetrahydrofuran is added dropwise at a rate sufficient to maintain the reaction mixture temperature at about -85° to -90° C. Upon completion of addition, the reaction mixture is again stirred at -90° C. for 30 minutes. After this time, the reaction mixture is allowed to warm to ambient temperature where it is stirred for about 18 hours. The reaction mixture is then poured into 150 mL of water and extracted with 150 mL of diethyl ether. The ether extract is dried with magnesium sulfate and filtered. The filtrate is concentrated under reduced pressure, yielding 4.8 grams of 3-methyl-3-(4-chlorophenyl)-1-trimethylstannyl-1-butene. The NMR spectrum is consistent with the proposed structure.

Aufarbeitung

  1. temperatureto maintain the reaction mixture temperature at about -85° to -90° C
  2. additionUpon completion of the addition
  3. temperatureto maintain the reaction mixture temperature at about -85° to -90° C
  4. additionUpon completion of addition
  5. stirringthe reaction mixture is again stirred at -90° C. for 30 minutes
  6. temperatureto warm to ambient temperature where it
  7. stirringis stirred for about 18 hours
  8. extractionextracted with 150 mL of diethyl ether
  9. extractionThe ether extract
  10. dry with materialis dried with magnesium sulfate
  11. filtrationfiltered
  12. concentrationThe filtrate is concentrated under reduced pressure

Quellen und Nachweise

ORD-Eintrag
ord-3bed95c2586f44ddb4f68ecab2919f8a
Quelldatensatz
uspto-grants-1997_12
DOI
10.6084/m9.figshare.5104873.v1
Patentnummer
US05696259

Notizen zur Reaktion

Auf dieser SeiteKomponentenReaktionsbedingungenVersuchsvorschriftAufarbeitungQuellen und NachweiseNotizen zur Reaktion