Br[C:2]1[N:6]2[CH2:7][CH2:8][CH2:9][N:10]([CH3:12])[CH2:11][C:5]2=[C:4]([C:13]([NH:15][C@@H:16]([CH2:21][CH:22]([CH3:24])[CH3:23])[C:17]([NH:19][CH3:20])=[O:18])=[O:14])[N:3]=1.C(=O)([O-])[O-].[K+].[K+].[F:31][C:32]1[CH:37]=[C:36]([Cl:38])[CH:35]=[CH:34][C:33]=1B(O)O>O1CCOCC1.O.C1(P(C2C=CC=CC=2)C2C=CC=CC=2)C=CC=CC=1.C1(P(C2C=CC=CC=2)C2C=CC=CC=2)C=CC=CC=1.C1(P(C2C=CC=CC=2)C2C=CC=CC=2)C=CC=CC=1.C1(P(C2C=CC=CC=2)C2C=CC=CC=2)C=CC=CC=1.[Pd].[Pd]>[Cl:38][C:36]1[CH:35]=[CH:34][C:33]([C:2]2[N:6]3[CH2:7][CH2:8][CH2:9][N:10]([CH3:12])[CH2:11][C:5]3=[C:4]([C:13]([NH:15][C@@H:16]([CH2:21][CH:22]([CH3:24])[CH3:23])[C:17]([NH:19][CH3:20])=[O:18])=[O:14])[N:3]=2)=[C:32]([F:31])[CH:37]=1A mixture of intermediate 55B (47 mg, 0.12 mmol), potassium carbonate (40 mg, 0.29 mmol), 2-fluoro-4-chlorophenylboronic acid (0.25 mmol) and palladium tetrakis(triphenylphosphine) (20 mg) in dioxane (1.0 mL) and water (0.5 mL) was heated at 110° C. in a sealed vial for 4 h. After cooling down to room temperature, the mixture was passed through a thiol-based palladium scavenger resin (PolymerLabs). The residue was concentrated to dryness, to which MeOH (0.5 mL) was added. The solution was filtered to remove insoluble material and purified by prep LC-MS with 5% MeCN/water to 95 MeCN/water (0.1% formic acid) in 15 min. Pure fractions were evaporated with a Savant speedvac. The oil residue was taken up in DCM (1.0 mL) and diluted with hexane (1.0 mL). Evaporation under air flow with mild heating give white solid product Compound 529 at 40% yield. 1H-NMR (400 MHz, CDCl3) δ: 0.96 (t, J=4.8 Hz, 6H), 1.59-1.72 (m, 2H), 1.81-1.90 (m, 3H), 2.47 (s, 3H), 2.56 (br, 2H), 2.78 (d, J=4.8 Hz, 3H), 2.98 (br, 2H), 3.96 (br, 2H), 4.52-4.58 (m, 1H), 6.48 (br, 1H), 7.21-7.24 (dd, J=2.0, 9.6 Hz, 1H), 7.29-7.31 (dd, J=1.7, 10.0 Hz, 1H), 7.39 (d, J=8.4 Hz, 1H), 7.50 (t, J=8.0 Hz, 1H). LCMS (+ESI) m/z 450.2, 452.2 [M+H]+.